Instruction manual
Car backing signal connection
Using the control wire included,
connect the AV switch control socket to
car backing. When backing, the unit will
automatically switch to AV mode; so, if a
rear view camera is connected to the unit,
the display will show the picture of behind
the vehicle.
USB connection
Connect the included Mini USB-USB
cable to the USB slot of the unit. Then
connect a USB to the other end of the
cable. The display will show a menu of
contents, from which you can select files
for playback. To disconnect the USB, just
pull it out from the cable.
Memory card connection
Insert an SD/MMC memory card into
the slot in the bottom of the unit (observe
the correct direction). The display will
show a menu of contents, from which
you can select files for playback. To
disconnect the memory card, just pull it
out from the slot.
Menu operation
AV Mode/USB mode
Press MENU or
setting menu for picture, audio and function.
Press CH+/CH- buttons or
buttons to choose the parameter you need
to adjust. Then press VOL+/VOL- buttons
or
/
to adjust the parameter.
6
button to access
/
FUNCTION: Signal is for selecting
AV or TV signal; Sleep is for choosing
the period (in minutes) until the automatic
turning off;
is for changing vertical
position of the image; Zoom is for
changing the screen size; Language is for
selecting the on-screen menu language.
TV Mode
Press MENU or
setting menu for picture, audio, TV and
function.
Press CH+/CH- buttons or
buttons to choose the parameter you need
to adjust. Then press VOL+/VOL- buttons
or
/
to adjust the parameter.
PICTURE
BRIGHT
CONTRAST
COLOR
AUDIO
VOLUME
FUNCTION
SIGNAL
SLEEP
LANGUAGE
ZOOM
button to access
/