Advertisement
Available languages
Available languages
previous or next file.
•
button: While playing a file from
USB/memory card, press to pause or
resume playback.
•
button: While navigating folders
and files, press to go back to the main
menu.
•
button: Press to select picture
display format.
•
button: Press to select picture
mode Standard/Bright/Soft/Gorgeous.
•
Cursor buttons (
Press to navigate in various menus. While
playing a picture file from USB/memory
card, press to rotate the picture.
Installation and connection
Stand installation:
• Release the metal washer on the top
of the bracket but do not separate it from
the bracket.
• Insert the metal washer with the
bracket into a hollow at the back of the
unit and move the bracket up to a suitable
height.
• Tighten the front screw up on the
bracket to fix the stand with the unit.
• Control the screen angle with the
lateral screw.
• Screw the stand to the bracket.
Connection of the antenna:
Plug the antenna into the Antenna in
slot situated on the rear panel of the unit.
Connection of earphone:
Connect the headphone to the
earphone jack for private listening.
The speakers will not operate when
headphones are connected.
DC adaptor or car adaptor to the power
source input socket and the other end to
the wall outlet at the suitable voltage. When
in house, use the AC/DC adaptor; for car
use, connect with the car adaptor (adaptors
included should be only used). Press
POWER/
/
/
/
):
picture below. After connection, switch
the unit to the AV mode.
Instruction manual
Connection to power source:
Connect one round end of attached AC/
button to turn on the unit.
AV input connection
Connect the AV cable as showed in the
Connect to AV system
video out
video out
Connect to AV system
AV
audio out
system
audio out
Connect to car
backing camera
5
Advertisement
