Specifications - Ramsey Electronics UAM4SYS Assembly And Instruction Manual

Universal audio amplifier system
Table of Contents

Advertisement

may result in voiding your warranty. Please contact our technical support
department for further information.
CONCLUSION
As our customers, we value your opinions, comments, and additions that you
would like to see in future publications. Please submit comments or ideas to:
Ramsey Electronics, LLC
Attn. Hobby Kit Department
590 Fishers Station Drive
Victor, NY 14564
or email us at: techsupport@ramseyelectronics.com

SPECIFICATIONS

Power Supply:
Voltage
Current
Connector
Audio Outputs (left & right):
Line Outputs:
Headphones:
Speaker Outputs:
Power:
Controls/Indicators:
Front Panel:
Buffered:
Connector:
Connector:
Connector:
Main audio:
Headphone:
Mute:
Loudness:
12VDC to 18VDC
3.3A max @ 18VDC
2.1mm center positive (rear panel)
Selectable direct input or processed
by main audio controls
2 x RCA jacks (rear panel)
3.5mm stereo (front panel)
Spring clamp terminal block (28AWG –
14AWG wire) (rear panel)
2 x 21W Max @ 18VDC input voltage (stereo
mode) (8 ohm load, THD = 10%)
1 x 42W Max @18VDC input voltage (mono
mode) (4 ohm load, THD = 10%)
Bass, Treble, Balance, Volume
Digital 64 step up/down level buttons with
memory
Digital push button with LED indicator
Digital push button with LED indicator
UAM4SYS • 36

Advertisement

Table of Contents
loading

Table of Contents