Operation Instruction; General Instructions; Control Buttons - AOC 2036Sa Service Manual

3. Operating Instructions

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control buttons are located on the side of the monitor.
By changing these settings, the picture can be adjusted to your personal perference.
• The power cord should be connected.
• Connect the video cable from the monitor to the video card.
• Press the power button to turn on the monitor position. The power indicator will light up.
3.2 Control Buttons and Connections

3.2.1 Control Buttons

Power: Press to turn on or turn off the monitor.
4:3 or wide / Up
Press key to change the screen aspect ratio between standard 4:3 format or Wide format.When the input
resolution is wide format, the aspect ratio hotkey is disabled. When the main menu or sub-menu is active, the key
functions as to select up or increase value.
Auto / Down: Auto configure hot key: When the OSD is closed, press Auto button to do auto configure.
3.2.2 Connections
Cable Connections on Back of Monitor and Computer
To protect equipment, always turn off the PC and LCD monitor before connecting.
1. Connect the power cable to the AC port on the back of the monitor.
2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port.
3. Turn on your monitor and computer.
1. Power
2. Analog (D-SUB-15 VGA cable)
3. USB
7
3