Connecting Headphones - JVC LT-Z37DX5 Service Manual

Additional preparation

Connecting headphones

Connect the headphones with a stereo mini-
jack (3.5 mm diameter) to the headphone
jack.
• No sound comes from the TV speakers
when the headphones are connected.
TV output from the OUT terminal
The video/sound signal of a TV channel you
are viewing is always output from the OUT
terminal.
• No signal will output through the S VIDEO
terminal when you are not viewing images
coming from the S VIDEO input. In this
case, use the VIDEO terminal instead of
the S VIDEO terminal.
• Changing over a programme number (PR)
also changes over the TV output from the
OUT terminal.
• When using the VIDEO-1 COMPONENT
Y Pb/Cb Pr/Cr terminal input, VIDEO-3
COMPONENT input VIDEO-4 (HDMI)
input or PC IN input, the sound signal is
output from the OUT terminal but the
picture signal is not output.
• Teletext programmes cannot be output.
Connecting speakers/amplifier
While referring to the audio equipment
connection diagram, connect the audio
equipment you want to the TV.
You can use external front speakers to listen
to the TV sound instead of the TV speakers.
Before connecting anything:
• Read the manuals provided with the
amplifier and speakers.
• Turn the TV and amplifier off.
• Note that connecting cables are not
supplied.
48
without terminal covers
IN (HDMI AUDIO)
R L
(ANALOG)
IN
R
L
1 Amplifier
2 External speakers (Magnetic-shielded type)
• The output from the OUT terminal is not
interrupted by headphone connection to
the TV. You cannot cut the sound from
the front speaker even if you connect a
headphone to the TV.
• Adjust the volume of the external
speakers with the amplifier.
IN (H D M
I A U D IO
)
(A N A LO
G )
IN