Let's Get Connected - Optus ADSL2+ WIFI MODEM Manual To Installing

LET'S GET CONNECTED

STEP 1
Heads-up (SERIOUSLY):
Make sure you don't switch off your modem for at least 10 minutes after plugging it in.
1
Plug the Line Filter into your
wall socket.
1 2
DSL
TIP: If you don't have a telephone or
have your phone connected to a wall
socket in another room, just plug the
telephone cable directly into the wall
socket from your modem. Ensure that
all telephones are filtered regardless
of where your modem is plugged in.
2
Time to match colour with colour.
Grab the grey telephone cable and
plug one end into the back of the
filter – port labelled ADSL. Plug the
other end into the grey port at the
back of the modem, labelled DSL.
RESET ETH1 ETH2 ETH3 ETH4 PWR
LINE
FILTER
ADSL PHONE
3
Connect your phone to the port
labelled phone. Too easy.
WALL
SOCKET