Page 2
The system allows for a coverage with a 60-degree scattering angle both on horizontally and vertically. XTODS is a double subwoofer included in the X-ONE line to The small-sized and light cabinet is constructed from a 3/4’’ (19 achieve a high enhancement at low frequencies while maintaining mm) birch multiply painted with a special hot-applied bi-compo- an excellent efficiency and a reduced distortion.
Instructions for use ghtline problems that commonly occur and provides better high The X-ONE speaker systems can be used both at floor level as frequency penetration into the audience with reduced shadowing well as suspended. The double subwoofer XTODS is available for effects.
More complex set-ups will benefit from the use of XT The rear panel of XTO, XTOS and XTODS loudspeakers are fit- amplifiers provided with a digital DSP. X-ONE systems can also ted with two Neutrik Speakon NL4 connectors. be used with XT266 Digital Speaker Management system and All four pins of each connector are wired in parallel.
Page 5
’ s m a n u a l Examples: 8 ohm connection 4 - 8 ohm connection XTODS 4 ohm connection XTODS X-TREME via Monti Urali, 31 - 42029 Reggio Emilia (Italia) • tel. +39 - 0522 - 557735 • fax. +39 - 0522 - 393733 • e-mail: info@x-tremeaudio.com...
Need help?
Do you have a question about the X-One and is the answer not in the manual?
Questions and answers