Advertisement
Quick Links
Advertisement
Related Manuals for X-TREME XTO
Summary of Contents for X-TREME XTO
- Page 1 X-ONE X-ONE User’s manual...
-
Page 2: Table Of Contents
11. System configurations Fig.1 XTO speaker The XTO is a two-way loudspeaker system with a 15’’ woofer and a 1.4’’ driver within a coaxial structure. The advantage of this system is that it allows the same sound diffusion as a point source, generat- ing a clear and transparent sound by creating a coherent wavefront, while limiting the phenomena resulting from secondary lobes. -
Page 3: Instructions For Correct Use
It can be easily arrayed with an XTO speaker increases vertical directivity and allows an extraordinary coverage, both in horizontal and vertical arrangements. -
Page 4: Stacking Guidelines
For more demanding rock music applications, a ratio The table below gives an indication of the maximum admissible cable of 1:2 (1 XTO - 2 XTOS) is recommended to provide a more suitable run for various cross-sectional conductors. low frequency contour (e.g. 2:4, 4:8, 8:16). -
Page 5: System Configurations
For further information about limiters threshold setting please refer to the controller’s user guide. The nominal horizontal coverage pattern of XTO is 60-degrees. This value is considered to be the optimum one in order to meet the re- quirements of both small-and-medium size installations. - Page 6 X-Treme Audio reserves the rights to change or modify products and specifications at any time without prior notice. X-Treme and the corresponding symbols, images and registered trademarks are of exclusive property of Sound Corporation group. © 2010 Sound Corporation group. All rights reserved.