LG LMVM2277ST Service Manual page 20

I. REMOVING THE VENTILATION MOTOR
(1) Remove the mounting plate by loosening 2 mounting
plate screws securing it to the back plate.
(See Figure 18)
(2) Remove blower plate by loosening two screws
securing the ventilation Motor and back plate.
(See Figure 19-a)
Figure 18
Figure 19-a
(3) Carefully pull the ventilation motor ASS'Y out of the
microwave oven.(See Figure 19-b)
Figure 19-b
Blower plate
7-10
J. REMOVING THE TURNTABLE MOTOR
(1) Remove the glass tray and plastic tray.
(2) Remove the base plate by removing 8 screws
securing it to the oven cavity.(Figure 20)
(3) Disconnect the leadwire from the turntable motor
terminals.
(4) Remove the two screws securing the turntable
motor to the oven cavity ASS'Y.(Figure 21)
NOTES:
• Remove the leadwire from the turntable motor
VERY CAREFULLY.
• Be sure to grasp the connector not the wires when
removing.
Figure 20
Wire Leads
Turntable Motor
Figure 21