LG LMVM2277ST Service Manual page 15

B. REMOVING THE OUTER CASE
(Figure 5)
(1) Remove the two vent grille mounting screws.
(2) Remove four screws securing it to the air duct.
(3) Remove the mounting plate by turning 2 screws
securing it to the outer case.
(4) Remove two screws on the left central edge and
two screws on the right central edge of Base plate.
Remove the Blower plate from the outer case by
removing two screws securing it to the outer case.
(5) Remove four screws on the rear cavity.
(6) Remove one screw on the right side of outer case.
(7) Remove the outer case.
Vent Grille
Door
Controller
Power cord
Figure 5
7-5
Blower plate
Mounting
Plate
Outer Case