Mercedes-Benz Nav + 4 Operating Instructions Manual page 17

MBA_BA_book.book Seite 15 Mittwoch, 2. September 2009 1:30 13
• Arrival time/ dist. rem.:
The estimated arrival time and the
remaining distance are displayed.
Displaying of points of interest
1. Select Navi in the navigation menu.
2. Select Configuration
POIs category.
3. Select the categories.
Note
For points of interest to be displayed in
the map view, Navi Map
POIs must be activated.
The higher the level of detail in the map
view, the longer it takes for the map to
be displayed.
Delete personal data
1. Select Navi in the navigation menu.
2. Select Configuration
lete Personalized Data .
3. Press Yes to confirm deletion of data.
The personal data in the memory of
the Universal Media Interface will be
deleted.
Map
1. Select Navi in the navigation menu.
2. Select Map.
3. Select the perspective of the map
view:
• North up: Two-dimensional map view
with North at the top.
• Head up: three-dimensional map view
in direction of travel.
4. Select additional information:
• Autozoom: the displayed map section
Show
is automatically zoomed in or out accor-
ding to the speed.
• Show Reality View: When route
guidance is active, this function shows
the important traffic areas on highways
and state roads with a larger lane
recommendation.
• Show Sign Post: When route gui-
De-
dance is active, this function shows the
street signs for the upcoming highways
and state roads.
• Show lane adviser: With route
guidance active on multi-lane roads,
this indicates the recommended driving
lanes using blue arrows.
Navigation system
• Show driving maneuver: With
route guidance active, this shows the
next driving maneuver.
G
Risk of accident
The Universal Media Interface may give the
incorrect speed limit if the actual road situa-
tion differs from the data on the digital map.
For this reason, you must always observe ap-
plicable road and traffic controls and regula-
tions during your journey.
• Show speed limits: shows the
permitted speed limits on each section
of the route that are stored in the data
of the map.
• Show POIs: Shows points of interest
on the map.
Note
The point of interest categories can be
selected at Navi Configuration
Visible POIs on map.
• Show One Way: Shows one-way
streets on the map with white arrows.
15