System Setting - Technika LCD19ID-107 User Manual

System Setting

From here you can set the First Time Installation, display system info, change the pin
code or update software.
First Time Installation
Select First Time I nstallation and press ENTER, the following screen will pop up.
Press or to select Confirm/Exit and press ENTER for confirmation.
System Info
The System Info menu displays the software and hardware version.
Change Pin Code
The Change Pin Code menu allows you to change the password, which is currently
set to 888888.
1. Enter your original and new PIN Code using the numerical buttons on the remote
control.
2. Press the or button, and enter the new PIN code again.
3. Press the ENTER button to confirm the new PIN code.
Software Update
Software Update
The displays the software update mode, you can selected Auto
Mode or Manual Mode if there is update software being broadcasted over the air.
.
First Time Installation
System Info
Change Pin Code
Software Update
Are you sure you want to delete
all channels and setting for first
time installation?
Confirm Exit
-23-
Getting Started