Fault Causes And Rectifi Cation - Silvercrest SUP 128 A1 Operating Instructions Manual

Fault causes and rectifi cation
GB
IE
Defect
No indications on the
display .
The turntable
not turn, in spite of the
fact that the pickup
arm is located in
the playback position.
Pickup arm jumps,
slides or does not
move forward.
Music played back
at wrong pitch.
NO USB is displayed.
NO CARD is displayed.
22
The following table will help with localising and remedying minor malfunctions:
Possible cause
The device is not
switched on.
The plug is not
connected.
The mains socket is not
supplying any power.
does
Wrong operating
mode selected.
The device is not level.
Anti-skating incorrectly
adjusted.
Tracking force set in-
correctly.
Wrong speed selected
on the turntable.
No USB data medium
is connected.
Incorrect format.
No memory card
connected.
Incorrect format.
NOTE
► If you cannot solve the problem using any of the aforementioned methods,
please contact the Customer Service department.
Remedy
Switch the device on.
Insert the plug into the mains mains
power socket.
Check the house fuses.
Select the operating mode PHONO.
Stand the device on a level surface.
Check the anti-skating settings.
Check the tracking force settings.
Use the dial to set the correct
speed (33 ⅓ or 45 rpm) and per-
form fi ne adjustment using the
PITCH ADJ. controller.
Connect a USB data medium to
the port .
Check that the data medium is for-
matted with the FAT32 fi le system.
Insert a memory card into the card
slot .
Check that the data medium is for-
matted with the FAT32 fi le system.
SUP 128 A1