Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Prime R150X2
Summary of Contents for Prime R150X2
- Page 1 Installation assistance availible at: Installation & Operation...
-
Page 2: Specifications
Specifications Introduction If, after reading your manual, you still have questions regarding this prod- Safety uct, we recommend that you see your Rockford Fosgate dealer. If you need This symbol with “WARNING” is intended to further assistance, you can call us direct at 1-800-669-9899. Be sure to alert the user to the presence of important in- have your serial number, model number and date of purchase available structions. -
Page 3: Design Features
Design Features Design Features Variable Phase Crossover Switch The variable 0-180˚ phase control allows the listener Selectable switch for Low-Pass (LP) or to change the arrival time of the subwoofer sound All Pass (AP) or High-Pass (HP) waves relative to the same frequencies from the main speakers. - Page 4 Models R750-1D and in good condition should be able to handle the extra load of any Prime cable to the chassis using a non-anodized screw and a star washer. R1200-1D are not recommended for imped- Series amplifier without problems, although battery and alternator life can 3.
-
Page 5: Installation
Installation Installation 2-Channel (Stereo) 2-Channel (Mono) R150X2 R150X2 PASS-THRU PASS-THRU Connect to inputs Connect to inputs of 2nd amplifier of 2nd amplifier *Installation option for *Installation option for multi-amp install multi-amp install – – – – INPUT PASS-THRU INPUT PASS-THRU... - Page 6 Installation Installation 4-Channel (Stereo) 4-Channel (2ch Stereo & 1ch Mono-Bridged) R250X4, R300X4, R400-4D & R600-4D R250X4, R300X4, R400-4D & R600-4D – – – – – – – – REAR FRONT REAR FRONT HIGH LEVEL HIGH LEVEL INPUT INPUT LEFT RIGHT LEFT RIGHT LEFT...
- Page 7 Installation Installation 4-Channel (2ch Mono-Bridged) 3-Channel (2ch Bridged & 1ch Parallel) R250X4, R300X4, R400-4D & R600-4D R600X5 – – – – – – – – – REMOTE PUNCH LEVEL REAR FRONT REAR FRONT HIGH LEVEL INPUT HIGH LEVEL INPUT LEFT RIGHT LEFT RIGHT...
- Page 8 Installation Installation 5-Channel (4ch Stereo & 1ch Mono) Mono Wiring R600X5 R250X1 & R500X1D PASS-THRU Connect to inputs of 2nd amplifier *Installation option for multi-amp install – REMOTE PUNCH LEVEL – – – – – REMOTE PUNCH LEVEL INPUT PASS-THRU REAR FRONT HIGH LEVEL...
-
Page 9: Operation
50-250Hz. Turn the crossover adjustment knob all the way down. With the system playing, turn the crossover adjustment knob up slowly until the desired Variable 0-+12dB @ 45Hz (R150X2, R250X1, R500X1D & R600X5) crossover point is achieved. illus.-3.4 illus.-3.8...
Need help?
Do you have a question about the R150X2 and is the answer not in the manual?
Questions and answers