Connecting To A Tv With Component Input Terminals (For Other Countries); Connecting To An Audio Component - Kenwood DV-605 Instruction Manual

12
Connecting to a TV with Component input terminals
TV
Component cords
Audio cord

Connecting to an Audio component

TV
TV
1. In case an associated system component is connected, also read the instruction manual of the component.
2. Insert the optical-fiber cable straight into the connector until it clicks.
Notes Notes
3. Never bend or bundle the optical-fiber cable.
COMPONENT
VIDEO OUTPUT
Cr VIDEO AUDIO
OUTPUT
OUTPUT
Cb
L
Y R
S-VIDEO
AV receiver or Amplifier
Video cord or S-video cord
Audio cord
Coaxial or Optical cable
AV receiver or Amplifier
Video cord, S-video cord or
Component cords
Audio cord
Coaxial or Optical cable
(For other countries)
[ For U.S.A. and Canada ]
Select the scanning method of the Component
Video output using the COMPONENT VIDEO
OUTPUT switch on the rear panel.
COAXIAL OPTICAL
INTERLACE: Scanning method is fixed at in-
terlaced scanning.
PROGRESSIVE: When progressive scanning
is unavailable with certain discs, the scan-
ning method is switched automatically to in-
terlaced scanning. When the scanning
method is changed, the scanning status will
be displayed for a few seconds.
(For Europe and U.K.)
AV
(For other countries)
System Connections
DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)
VIDEO AUDIO
COAXIAL OPTICAL
OUTPUT OUTPUT
L
R
S-VIDEO
COMPONENT
VIDEO OUTPUT
Cr VIDEO AUDIO
COAXIAL OPTICAL
OUTPUT
OUTPUT
L
Cb
R
Y
S-VIDEO