Download Print this page
Tissot TWOTIMER Setting Instructions

Tissot TWOTIMER Setting Instructions

Advertisement

Quick Links

about:blank
TISSOT TWOTIMER SETTING INSTRUCTIONS
The Twotimer is available in many different styles, in both round and rectangular cases
but the setting instructions are identical for all.
1 of 5
26-03-2011 13:49

Advertisement

loading

Summary of Contents for Tissot TWOTIMER

  • Page 1 TISSOT TWOTIMER SETTING INSTRUCTIONS The Twotimer is available in many different styles, in both round and rectangular cases but the setting instructions are identical for all. 1 of 5 26-03-2011 13:49...
  • Page 2 about:blank Analog Display Dial and hands indicate local time. Local time is indicated in the dial's digital display. (Not on the watch above). The Various Functions of The Digital Display As well as local time, you may select six additional functions whilst the crown is in position A (see diagram above).
  • Page 3 about:blank Push the crown back into position A. The seconds display will continue flashing for another minute to permit synchronisation of the watch with a time signal. At the time signal, press the crown briefly to position A1 (fully depressed) and the seconds will set to 00.
  • Page 4 about:blank Push the crown to position A1 for about 2 seconds. The countdown will be interrupted and the timer will re-set to zero. 7. Setting the Second Time Zone (T2) Select function T2 by turning the crown whilst in position A and line 3 will flash. Pull the crown out to position B and the hour display will flash.
  • Page 5 about:blank 11. Testing the Alarm (AL) Select function AL by turning the crown whilst in position A and line 5 will flash. Push the crown to position A1 for more than 2 seconds and the alarm will sound. Check that the alarm ON (AL) or OFF (OF) is selected as required. 12.