Summary of Contents for Tissot T-Touch T001.520.47.051.00
Page 1
+ correction / chrono Hour hand Rotating bezel Activation / validation - correction / chrono Digital display Scratch-resistant sapphire tactile crystal Page Synchronisation Display mode Setting the time Setting the date Selecting the units Tactile area 138_en / 03.11 1/14 www.tissot.ch...
Congratulations Congratulations on choosing to buy a Tissot watch, a Swiss brand with one of the greatest reputations in the world. Your T-Touch watch incorporates state-of-the-art technology. It offers permanent analogue display of the time as well as varied digital displays. In addition, the following functions are available by simply touching the crystal: meteo, altimeter, chronograph, compass, alarm and thermometer.
Repetitive actions Hand position display Care and maintenance We recommend that you clean your watch regularly using a soft cloth and lukewarm water. After bathing in salt water, rinse your watch with fresh water and leave it to dry completely. Avoid exposing your watch to excessive variations in temperature or humidity, to strong sunlight or stong magnetic fields. Battery type: button-type lithium-manganese dioxide primary battery cell. 138_en / 03.11 3/14 www.tissot.ch...
(h-m-s / date / units) Display mode 1” Activation of the crystal h-m-s Selecting the display mode date units Return to h-m-s mode (1) The “h-m-s” and “date” modes remain active. (2) The “units” mode is a temporary setting mode. (3) This procedure is valid when the crystal is activated for the ALTIMETER, CHRONO, COMPASS, ALARM, THERMO and METEO functions. www.tissot.ch 4/14 138_en / 03.11...
Validation of the setting (1) The calendar is semi-perpetual, that is the number of days per month is predefi- ned. For February it is necessary to reset the date when it is only 28 days. 138_en / 03.11 5/14 www.tissot.ch...
Indication of the meteorological tendencies METEO 1” Activation of the crystal Activation of the meteo function (1) For more information, see the explanation of the meteo function on page 10. (2) The two hands indicate a tendency while the digital display gives a calculated pressure in hectoPascal (absolute value). After 30 seconds, the digital display returns to “h-m-s” mode. www.tissot.ch 6/14 138_en / 03.11...
Page 7
CHRONO (split) duration with intermediate time Activation of the crystal 1” Activation of the chronograph Starting the chronograph Displaying the intermediate time (eg. 48’’ and 15/100) Restarting the chronograph, taking into account the running time Stopping the chronograph (eg. 2’ 54’’ and 88/100) Resetting the chronograph 138_en / 03.11 7/14 www.tissot.ch...
Deactivation of the alarm Setting the time 2” Incrementation or decrementation + or - 1 minute by one minute Validation of the setting (1) When the programmed time is reached, the alarm can be stopped by pressing one of the pushers. The alarm bell sounds for 30 sec. and is not repeated. www.tissot.ch 8/14 138_en / 03.11...
Page 9
(1) To obtain the best reading, it is necessary to remove the watch from your wrist and wait for approximately 15 to 30 minutes. For more information, see the explanation of the thermometer on page 13. (2) The temperature is displayed in degrees Celsius or in degrees Fahrenheit depen- ding on the units selected (see “selecting the units” on page 6). After 30 seconds, the hands display the time again but the digital display remains in THERMO mode. 138_en / 03.11 9/14 www.tissot.ch...
Page 10
Furthermore, the variation in pressure caused by a rapid change in altitude is detected by the program and compensated for automatically. It therefore has no influence on the barometric trend. Unit conversion: 1 hectoPascal [hPa] = 1 millibar [mb] Technical data Measuring range: 300 hPa to 1100 hPa Accuracy: ± 3 hPa Resolution: 1 hPa www.tissot.ch 10/14 138_en / 03.11...
Page 11
T-Touch watch to orient a map. The bezel ring is graduated with the following values: - 30°between two points; - 15°between a cardinal point (N,E,W,S) and the closest points. It is very important that you hold the watch as horizontal as possible to obtain a true indication of North. Technical data Accuracy: ± 8° Resolution: 1° 138_en / 03.11 11/14 www.tissot.ch...
Page 12
1000 19.3 / 66.7 1007 / 3304 13.6 / 56.4 1985 / 6513 7.3 / 45.2 Technical data Measuring range: - 400 m to +9000 m - 1300 ft to +29500 ft Resolution: 3 ft www.tissot.ch 12/14 138_en / 03.11...
Page 13
(see page 6 for the procedure for changing these units). Conversion formulae: T°C = (T°F - 32) x - T°F = T°C x - + 32 Technical data Measuring range: -10°C to +60°C 15°F to 140°F Accuracy: ± 1°C ± 1.8°F Resolution: 0.4°C 0.7°F 138_en / 03.11 13/14 www.tissot.ch...
Solution The display alternates between «bat» and the time (EOL) The display goes out and the hands stop The battery is discharged Ask an approved Tissot dealer to change the battery In meteo mode the display shows «hPa» but no value The pressure sensor is faulty Ask an approved Tissot dealer to repair the watch In meteo mode the two hands are not exactly over noon...
Need help?
Do you have a question about the T-Touch T001.520.47.051.00 and is the answer not in the manual?
Questions and answers