Advertisement
Auto Fill System
(As an optional Only available on Episode LX)
Features & Operation
a.
Automatic spa fill with intelligent and reliable level sensor
b.
Time delay setting
c.
Dual Switched outlets / Control Box
d.
Dual continuous outlets
e.
Single Drain pump controlled outlet with 3 minute timer ( If drain pump requested as an Option)
f.
Heavy duty water valve
g.
Operated in automatic or manual mode
h.
Automatically shutdown Jet and LED light If water level in the basin is below the sensor
I.
Built in LED light power supply
j.
Built-in 1 hour timer
k.
Audible overflow warning in manual fill mode
INSTRUCTION
Water Faucet MUST be ON and desirable Temperature
must be set with Faucet handle before using Auto-fill System
1- Pressing the iFill - Auto button will fill the basin with
water automatically.
Water valve will shutoff when water level is above the
sensor.
KEY PAD
2- Pressing the JET button will turn On/Off the JET and
LED light manually.
LEVEL
3- Pressing the valve button will turn On/Off the water
SENSOR
manually.
WATER
VALVE
12 VAC
LIGHT
LIGHT (2A)
Key Pad
Level Sensor
Water Valve
Drain Air Switch
12 AC Light
CONT (2A)
CONT (2A)
iFILL DELAY
POWER
SETTING
LED
JET (2A)
DRAIN (2A)
ALL WIRES ARE INDICATED AS IT SHOWN
POWER
CORD
Manual On/Off Water
Power On Indicator
Continuous
Outlet (2 Amp)
Power Cord
Dura Jet III Built -in
Electrodes Water sensor
Press iFill - Auto to start fill the basin
and once reaches water level
Whirlpool / light will be activated
iFill-Auto
Manual On/Off Switch
for Jet & Light
Time delay setting
30
Auto Fill
Delay
5 S
Setting
Model: L0903A
Voltage: 120 VAC / 60 Hz
Product of USA
55 S
Advertisement
