Advertisement
NAMING DISCS AND TRACKS
Discs can be given names (up to 25 characters). On the CD-3280M,
CD-3260M, CD-2280M and CD-2260M, up to 20 tracks per disc can
also be named (up to 15 characters each).
Although the most convenient time to enter disc and track names is
when you insert the discs into the player for the first time, (that way
the player keeps track of the disc names for you as you insert the
discs), you can use this procedure to enter or change disc and track
names any time you want.
These instructions explain how to enter disc names when you insert
the discs into the player for the first time.
A.
Open the loading door and leave
it open for this entire operation
B.
Select an empty disc slot
1. Press the
.
DISK SEL
key.
2. Use the number
keys to enter the
disc number.
3. Press the
key.
SET
4. The disc tray will
spin around until
the disc slot you've selected is
in the open loading doorway.
For other ways to select a disc slot, refer to the changer's instruction manual.
C.
Insert a CD in the empty slot. Make sure
the label faces towards your right.
D.
Enter the Disc Name
1: Press the
key.
MODE
The display flashes:
IMPORTANT NOTES A
All models:
• Instead of the
key, use
SHIFT
the
/
.
key to
CHARACTER
P
MODE
shift between capital letters,
lowercase letters and num-
bers/symbols.
• Use the
key to select
SHIFT
the secondary symbols on
the number and symbol
keys.
2: Press the
SET
disc number
• Use the
enter sp
• If you m
the
CURS
keys to h
rect char
ke
DELETE
Advertisement
