Download Print this page

Anvil STA0001 R02 Installation Operation And Care page 4

Single /double stove plate

Advertisement

Electric Shock Hazard.
Keep water and other liquids from entering the inside
of the equipment. Liquid inside the equipment could
cause an electrical shock
Do not spray water or cleaning products. Liquid could contact the
electrical components and cause a short circuit or an electrical shock.
Do not use equipment if power cord is damaged or has been modified
SAFETY
READ ALL INSTRUCTIONS BEFORE USE. FAILURE TO
FOLLOW THESE PRECAUTIONS COULD RESULT IN INJURY TO
YOURSELF AND OTHERS
1.
When this appliance is to be positioned in close proximity
to a wall, partitions, kitchen furniture, decorative finishes, etc.
it is recommended that they be made of non-combustible mate-
rial. If not, they shall be clad with a suitable non-combustible
heat insulating material, and the closest attention be paid to fire
prevention regulations.
2.
Use the appliances on an individual 15A mains outlet only.
DO NOT OVERLOAD THE CIRCUIT.
3.
Ensure that the equipment and the power supply cord does not
come into contact with hot surfaces.
4.
Supervision is necessary when the appliance is used in close
proximity to children.
5.
If the supply cord is damaged, it must be replaced with a new
cord assembly available from the suppliers agent.
6.
Use only earthed outlets matching the serial plate voltage.
7.
Have equipment installed by a qualified personnel in accordance
with local codes and ordinances.
8.
Use equipment in a flat level position.
9.
Do not operate unattended
10. The equipment may be hot, even though the pilot light is not on.
11. Do not operate if equipment has been damaged or is malfunc-
tioning in any way.
12. These appliances are designed to run only on alternating current
(A.C.) DO NOT CONNECT TO DIRECT CURRENT (D.C)
WARNING
MODEL:DOUBLE STOVE
MODEL CODE : STA0002 R02
Part
Description
No.
1
180mm SOLID HOT PLATE
2
220mm SOLID HOT PLATE
3
BODY ASSEMBLY
4
7 STAGE SELECTOR SWITCH
5
CONTROL PANEL FACIA
6
PILOT LIGHT
7
CONTROL PANEL INSERT
8
CONTROL KNOB
9
BEZEL
10
ANVIL AXIS LOGO
11
SMALL RUBBER FOOT
12
BOTTOM COVER
13
SMALL PLATE CLAMP
14
LARGE PLATE CLAMP
15
LARGE HEAT SHIELD
16
SMALL HEAT SHIELD
17
POLYAMIDE TERMINAL BLOCK
18
STRAIN RELIEF
19
POWER CORD

Advertisement

loading

This manual is also suitable for:

Sta0002 r02