Advertisement
UNPACKING
Unpack the product and check for any damage incurred during
transit. This should be reported to the responsible carrier, railway or
postal authority, and a request for a damage report should be made.
THESE INSTRUCTIONS MUST BE FOLLOWED FOR US TO
GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM FOR
PROTECTING AGAINST LOSS FROM CONCEALED DAM-
AGE. THE FORM FOR FILING SUCH A CLAIM WILL BE
PROVIDED BY THE CARRIER.
GENERAL INSTALLATION AND OPERATION
INSTRUCTIONS
1. The top working surface has a heat resistant coating. Before
using the sealed hotplate for the first time, it should be heated
for ± 5 minutes at setting no. 2. This will enable the protective
coating to harden and burn off.
2. Use only good quality pans on the sealed hotplates. They should
have a stable bottom to ensure the greatest possible contact
with the sealed hotplate during operation. This will result in
maximum use of energy.
3. Use pans of the correct diameter only. They should cover the
sealed hotplate like an umbrella to allow any spillage to flow off
easily.
4. If the pan is too small, energy is wasted and spillage can flow
onto the sealed hotplate.
5. Anvil stoves are equipped with one pilot light which will remain
illuminated when the unit is switched on.
Advertisement
