Apache Horizon Operator's Manual

Laser system

Advertisement

Quick Links

Operator's Manual
8261 State Route 235
Dayton, Ohio 45424 USA
Phone: (937) 482-0200
Fax: (937) 482-0030
www.apache-laser.com
Laser System

Advertisement

Table of Contents
loading

Summary of Contents for Apache Horizon

  • Page 1 Operator's Manual 8261 State Route 235 Dayton, Ohio 45424 USA Phone: (937) 482-0200 Fax: (937) 482-0030 www.apache-laser.com Laser System...
  • Page 2 Thank you for purchasing an Apache Technologies, Inc. product. Your EMC Declaration of Conformity laser system is a premium quality tool that has been designed and This laser has been tested and found to comply with the limits for a Class B manufactured to provide years of precise and reliable performance.
  • Page 3: Table Of Contents

    Warranty Apache Technologies warrants the HORIZON laser to be free of defects in material and workmanship for a period of two years. This warranty period is Contents in effect from the date the system is delivered to the purchaser, or is put into service by a Dealer as a demonstrator or rental component.
  • Page 4: Horizon Laser System

    System Description 6. Low-Battery LED - flashes when batteries need replacing. The HORIZON laser system is a one-man leveling tool that allows one 7. Rotating Prism - rotates at 600 rpm to transmit the laser signal. person to take accurate, self-leveled elevation measurements up to 800 feet (250 m) away from the transmitter.
  • Page 5: Setting Up And Leveling The Laser

    How to Use the Laser System Setting Up and Leveling the Laser Installing / Removing the Batteries 6. Observe the location of the bubble (top or bottom of 1. Turn battery housing screws counterclockwise and remove the the bull's-eye) and using the left-thumb rule, turn the battery housing.
  • Page 6: Checking Calibration

    Checking Calibration Checking Calibration To check the horizontal calibration, a tripod with a 5/8-11 threaded 6. To correct for a calibration error, position mount, handheld detector, universal key (supplied), or a 1/16 in. (1.5 the receiver at the midpoint of the two mm) diameter pin or small nail are required.
  • Page 7: Specifications

    Specifications Troubleshooting If none of the following techniques corrects the problem, take the system Laser Type, Classification 670 nm visible, Class II to your dealer or authorized service center for evaluation or repair. Self-Leveling Range ±10 arc minutes Problem Solution Compensation Type Wire Hung, Air Damped Laser will not operate...
  • Page 8: Maintenance And Care

    Maintenance and Care Safety Information Following the maintenance and care recommendations in this manual Included in this manual are CAUTIONS and Notes. will provide years of service from the leveling system. A CAUTION indicates a hazard or unsafe practice that could result in Carry the laser in its moisture-resistant, field-tested carrying case to minor injury or property damage.

Table of Contents