Special Tools - E-TON EV3 E-MO Service Manual

SPECIAL TOOLS

SPECIAL TOOLS
The following special tools are necessary for complete and accurate tune-up and assembly. Use
only the appropriate special tools as this will help prevent damage caused by the use of inappropriate
tools or improvised techniques.
Tool NO.
Tool name:
SE3200-5BA0-0FA1
Function:
Tool name:
Function:
SA6100-A26-0FA1
Specification:
Tool name:
Function:
SA6100-A26-0FA2
Specification:
Tool name:
Function:
SD4712-EGC2-0FA1
Specification:
Tool name:
Function:
SD4711-EGC2-0FA1
Specification:
Tool name / Function
Six legs socket
To disassemble and assemble the nut
of front fork component.
Bearing inner puller set
To disassemble the bearing of front wheel.
8‚ 10‚ 12‚ 15‚ 17‚ 20‚ 22‚ 25‚ 30‚ 32/ mm
Oil seal & bearing installer set
Used for installing the bearing of the front
wheel and oil seal.
27, 32, 35, 40, 42, 45, 47, 48, 52, 58,
64/ mm
Tire valve driver
To disassemble and assemble an air
needle in the inner tube of a tire.
Double head (6.2mm& 5.4mm)
Tire lever component
To disassemble and assemble the inner
tube of a tire.
11 inch and 15 inch.
1-4
GEN
INFO
Picture