Removing The Fan Module; Removing The Cpu Heat Sink - AOpen OpenBook 1556 Service Manual

9. Lift up the LCD module carefully.
NOTE: When connecting the inverter cable and coaxial cable back to the unit, please note that the two cables
should be routed as shown.

Removing the Fan Module

1. See "Removing the Battery" on page 55
2. See "Removing the Middle Cover" on page 59
3. See "Removing the Keyboard" on page 60
4. Disconnect the fan cable from the main board by using a plastic flat screwdriver, remove the two screws,
and then detach the fan from the main board.

Removing the CPU Heat Sink

1. See "Removing the Battery" on page 55
2. See "Removing the Middle Cover" on page 59
3. See "Removing the Keyboard" on page 60
Chapter 3 65