Aaeon PCM-6894 User Manual page 90

Windows NT 4.0
1. Insert the PCM-6894 CD Diskette into the CD ROM Drive.
2. From Start, select the Settings, then click on the Control Panel
icon.
3. Double click on the Network icon. A Network Configuration box
will appear and show : Windows NT Networking is not installed.
Do you want to install it now?? Click on the Yes button.
4. Select Wired to the network and click on the Next button.
5. Click on the Have Disk button then keyin the following path: cd-
rom:\PCM-6894\Driver\Ethernet\Windows NT 4.0
"cd-rom" : the drive letter of your CD-ROM drive
6. A Select OEM Option screen appears and shows: Realtek RTL
8139/810X Family Fast Ethernet NIC. Click on the Ok button.
7. Click on the Next button.
8. Click on the Next button.
9. Click on the Next button.
10. Click on the Next button. The system will ask you to insert
Windows NT CD Diskette. Follow its instructions to complete the
setup procedure.
11. Restart your computer to allow the dual ethernets to take effect.
80
PCM-6894 User Manual