IOCELL CellDisk User Manual page 18

When your computer has a USB controller:
If CellDisk is configured as an unknown device, remove it by clicking [Remove]
and install the driver again.
If CellDisk is not configured as an unknown device, re-install the driver using
the New Hardware Installation applet.
Q. I plugged CellDisk into the USB port of my computer. But I still cannot
find the "removable disk" icon from My Computer or Windows Explorer.
A. Please unplug CellDisk and plug again. If your operating system is Microsoft
Windows 98/98SE, ensure that you have correctly installed the driver.
Q. I have deleted data from CellDisk by chance. What can I do?
A. CellDisk operates the same way as a hard disk drive. You can not recover the
data once it has been deleted.
Q. CellDisk is soaked in water. What can I do?
A. Please dry CellDisk completely prior to plugging it again. If you use CellDisk
while it is wet, the internal circuitry of CellDisk may malfunction, and thus not
operate correctly.
Q. Bad sectors have been found in CellDisk. How can I fix them?
A. The manufactures of flash memory used in CellDisk only deliver the flash
memory that has less than 2% bad sector. Sometimes, bad sectors can be
generated during using CellDisk. To remove bad sectors, download
SecureCell™ Utility from www.celldisk.com website and format your CellDisk
using it.
Q. I want to use CellDisk in other computers but I do not have the driver
installation CD.
A. The best advantage of CellDisk is that it supports 'hot-plug' for Microsoft
Windows ME/2000/XP, MAC 9.0 or higher, Linux 2.4.0 or higher. It means that
you need not to install any driver if the operating system is one of those. Just
plug your CellDisk to the USB port of the desired computer. If you are using
Microsoft Windows 98/98SE, you need to install the driver. For the driver,
please download the installation program from www.celldisk.com.
Q. Can I print files directly from CellDisk?
A. Yes. Open the file from CellDisk using an application program, like Microsoft
18