Ⅶ. Front And Rear Shock Absorber Inspection; Ⅷ. Front Wheel And Rear Wheel Inspection - Baotian BT125T-2 Service Manual

Ⅶ. FRONT AND REAR SHOCK ABSORBER INSPECTION
1. Front Shock Absorber
Tighten front brake lever, press front shock
absorber up and down and inspect actuation.
Inspect front shock absorber to see if there is
leakage of oil and if there is damage or loosening.
2. Rear Shock Absorber
Press rear shock absorber to inspect
actuation. Inspect rear shock absorber to see if
there is oil leakage and if there is damage or
loosening in machine parts.
Lift rear wheel, press rear wheel right and
left to inspect if engine suspension lug buffer
bush is loose.
Ⅷ.
FRONT WHEEL AND REAR WHEEL INSPECTION
Wheel Rim Inspection:
Inspect wheel rim, remove rust stains and rubber chips.
Deformation and fissures are causes of air leakage. Do not use wheel rims in the following
cases:
Bruise of wheel rim face contacting tire bead ring exceeds 0.5mm in depth and 1.0mm in
width.
Tire Inspection:
Inspect if there is fissure or iron nail in the tire.
In one of the following conditions, tires must be replaced instead of repair.
Puncture of tire by a foreigner matter 6mm in diameter or tire fissure.
Layered tire.
Chunking of tread
Damaged tire bead
Broken tire bead or other tire bead damages
Broken tire cord
9
front brake lever