Download Print this page

Directions For Use - Germ Guardian H-3000 Use & Care Instructions

Digital humidifier

Advertisement

WARNINGS
This product should be used only in accordance with the specifications outlined in this
!
manual. Usage other than what has been specified here may result in serious injury.
WARNING: THE CORDS, WIRES, AND/OR CABLES SUPPLIED WITH THIS PRODUCT
CONTAINS CHEMICALS, INCLUDING LEAD OR LEAD COMPOUNDS, KNOWN TO THE STATE
OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM,
WASH HANDS AFTER USING.
· Disassembly, repair or remodeling by an unauthorized person may result in serious harm.
· Do not use if plug is damaged or loose.
· Keep this product out of the reach of children.
· Be careful not to put water in the humidity spout.
· Before filling or cleaning the unit, make sure it is unplugged.
· Once the humidifier has been turned on, do not move it.
· Do not remove the bucket from the unit while it is on.
· Do not handle the plug with wet hands.
· Do not excessively bend, twist or pull the power cord.
· Avoid placing this product where the humidity is pointed directly at an electrical object.
· Do not directly inhale the humidity.
· Do not place this product on a sloped or unstable surface.
· When not in use, unplug the unit.
· Do not fill the bucket with hot or boiling water.
· Do not use this product in direct sunlight, or near a gas stove or heater.
· If the bucket becomes cracked or damaged, do not use.
· Do not clean the unit or bucket with detergents or chemicals of any kind.
· Do not use this product near any other electronic device.
· Do not cover the humidity opening at any time during use.
· Do not use this product near a sink.
· Do not place this product on an absorbent surface.
Failure to comply with the warnings listed above may result in electric shock or serious injury.
E-4

DIRECTIONS FOR USE

1. Unplug the unit from the wall socket.
3. Open the tank lid, turning it to the left.
5. Close the tank lid, turning it to the right.
2. Separate the tank from the body of
the unit.
4. Pour cool, clean water directly into
the tank.
6. Attach the tank to the body of the unit.
E-5

Advertisement

loading