1. Manuals
  2. Brands
  3. Galleon Manuals
  4. DVR
  5. VCSDVR-HDCVI4
  6. User manual

Galleon VCSDVR-HDCVI4 User Manual

H.264 standalone dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
H.264 Standalone DVR
USER MANUAL_V2.08

Advertisement

Table of Contents
loading

Summary of Contents for Galleon VCSDVR-HDCVI4

  • Page 1 H.264 Standalone DVR USER MANUAL_V2.08...

  • Page 2: Table Of Contents

    INDEX Chapter one Products Introduce..................4 1.1 Technical Parameter..........................4 1.2 Performance............................5 Chapter Two Hardware.......................6 2.1 H.264 standalone 4CH/8CH/16CH/24CH/32CH DVR............... 6 Chapter Three Operation....................11 3.１Operation instruction........................11 3.2 Powering On............................14 3.3 Shutdown............................16 3.4 Multi Channel............................16 3.5 Preview..............................17 3.6 Recording operation........................17 3.7 Playback video..........................
  • Page 3 9.1 instructions of Android........................86 9.1.1 Essential condition..........................86 9.1.2 Installation and operation instructions.................... 86 9.2 instructions of iPhone........................91 9.2.1 Essential condition..........................91 9.2.2 Installation and operation instructions.................... 91 Chapter Ten FAQ (Frequently Asked Questions)............96...

  • Page 4: Chapter One Products Introduce

    Power This DVR select the adaptor is DC12V; please make sure the power supply voltage before use the machine. If long time do not use the machine, please turn off the power of DVR machine, and let the electric plug away from power socket;...

  • Page 5: Performance

    Alarm output 1ch output or 2ch output;Varies according to the model Recording mode Manual recording, timing recording , motion detection recording and external alarm recording Simplex/duplex/ triplex triplex(recording, playback , LAN transmission) RJ45(10M/100M self-adapting) PTZ control Communication RS485×1，USB2.0×2 USB mouse control Hard disk drive 1or2or4x SATA（2TB or above）...

  • Page 6: Chapter Two Hardware

    requirement. 8ch alarm input ( alarm event mode can be set normal open or normal close selection),and turn-by-turn video loss alarm, dynamic detection alarm, the alarm device may be smoke detection * Possess specific interface, achieve Alarm censer, temperature detector, alarm input and PTZ control;...

  • Page 7: Rear Panel

    ○ 4 fix the screw of hard disk ○ 5 close cover ○ 6 install the screws on both sides of shell 2.1.2 Rear panel Item Interface Description VIDEO IN 4ch video input AUDIO IN 4ch audio input V-OUT 1ch video output A-OUT 1ch audio output VGA monitor...
  • Page 8 Item Interface Description VIDEO IN 8ch video input AUDIO IN ４ｃｈ ｏｒ 8ch audio input V-OUT 1ch video output A-OUT 1ch audio output VGA monitor ６ HD-OUT HDMI interface ７ NETWORK RJ45 First USB for backup or upgrade system of DVR; Second ８...
  • Page 9 Item Interface Description VIDEO IN 16ch video input AUDIO IN 4ch audio input V-OUT 1ch video output A-OUT 1ch audio output VGA monitor HD-OUT HDMI interface ６ ７ NETWORK RJ45 for internet USB/ MOUSE First USB for backup or upgrade system of DVR；Second ８...

  • Page 10: Alarm Input Port

    ALARM IN：16CH alarm input port RS-485：A, B RS485-S A,B ALARM OUT: N1 N2 for alarm output port, every channel connect C and O; port is for GND; 32CH Item Interface Description VIDEO IN 32ch video input AUDIO IN 8ch audio input V-OUT 1ch video output A-OUT...

  • Page 11: Chapter Three Operation

    for example, smoke detector. When you select the external power supply, please share the GND with DVR; Alarm input circuit: Alarm inlet connection: 2.1.4 Alarm output port 4 way switching value alarm output, selectable in normally open contact, also selectable in normally closed contact, the external alarm device should need Vcc;...
  • Page 12 Table： Keypad KEYpad Operating Operating Name Name instruction instruction This button is used 【POWER】 Power ON/OFF 【 ENTER 】 as“enter”and“ok” key in most 【OK】 circumstances Access main menu 【MENU】 Exit operation or enter upper menu Close soft keyboard Close current window Access/exit from PTZ control 【ESC】...
  • Page 13 Digital input Corresponding; playback 【0~9 10+】 Channel is magnified in full screen under preview state Short cut 【FN】 Playback stop Switching 【 】 【 】 1/4/8/9/16/24/32Preview mode Play / Pause 【 】 Four-way to move the focal point in main menu, up and ▲.▼.

  • Page 14: Powering On

    Right click mouse, popping the shortcut menu, as follows; Right click mouse 。 Through the menu can be switching preview screen window mode, start replays, PTZ control. Four pictures playback mode, the point of the right mouse button, Can in a single picture, four pictures, eight pictures (8 road playback), 16 screen road playback),...

  • Page 15: Main Menu

    Main Menu PTZ control Wizard language Alarm control Multi channel Display setup Recording Control Exit Playback Back up If before starting, the system not to install hard disk, into the system, will tip: system didn't detect any hard disk connection! Note: In this dialog you can select language and quickly set various of parameters.

  • Page 16: Shutdown

    3.3 Shutdown  There are two safety mode for Shutdown Enter【Exit】,select【Power Down】.  Abnormal shutdown Through the rear panel to shutdown During the DVR running, directly to turn off the power through the rear panel power switch, please avoid as much as possible to do it.

  • Page 17: Recording Operation

    the picture, re setting the date. There is a alarm input mode icon. (the meaning of every kind of icon as following table) Channel picture attention Channel happen when dynamic Channel is video when channel test, channel video pictures video pictures showed this symbol showed this symbol Channel open sound, the channel video pictures showed this symbol...

  • Page 18: Playback Video

    3.7 Playback video Button Description Button Description Synchronous/asynchronous play Voice adjustment 1/4/8/9/16/24/32 frame by frame screen(switch image) Speed slow Hide / display list Speed normal recording date Speed fast Play/pause/stop Sound off/on rewind Note: 1) During playback the Playback Tool will show the file playback speed, channel, timing, playback speed etc. information in the Playback control panel;...

  • Page 19: How To Control Ptz

    3.8 How to control PTZ 【Zoom】Lens in the current play far closer picture, use the mouse wheel also can undertake variable times control. 【Focus】Slight adjusting the focal length 【Iris】Aperture size adjustment 【Speed】Through the slider adjust rotation stepinterval, yuntai mainly used to control direction operation, the step length of turning the faster yuntai.

  • Page 20: Alarm Control

    【Left Limit】Began to limit scanning Settings, was registered date 【 right Limit 】, thus set up corresponding limit scanning. 【Add Preset】Add presets point to the cruise lines. 【Delete Preset】Cruise lines from deleting preset points. 【Clear Tour】Remove the cruise line designated. Note : some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.

  • Page 21: Display Adjust

    3.10 Display Adjust Video 【Video Effect】Optional: standard, downy, sharp, custom. 【Default】Restoring default effect, for custom video effects, copy standard effect parameters. Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc. (2)Monitor 【Device】Optional: VGA output, TV output etc display output device. 【Default】Restoring default display parameters.

  • Page 22: Chapter Four Menu Operation Guide

    【Device】The first generation of DVR’s optional: VGA output, TV output etc display output devices, the system may support multiple equipment and output. The second generation of DVR’s optional:VGA Output+HDMI Output、TV Output. 【Resolution】Setting the resolution of the display device. The first generation of DVR default VGA resolution is 1024 x 768; The second generation of DVR default VGA resolution is 1280 x 1024;...
  • Page 23 (NTSC) continuous adjustable.【Audio】Can select close, open according to requirements 【Pre-Alarm Rec】Can select close, open according to requirements (2)Channel Overlay 【Channel】Choose the need to install passage "whole" says setting all channels. 【Channel Name】Can manual corresponding input channel's name 【 Channel Display 】 Can choose according to the requirements of users don't use, the top-left corner, left, lower, middle and downward, upper, right, and lower.

  • Page 24: Camera

    4.2 Camera When the system starts the camera will detect the format of video (1) PTZ Setup 【Channel】Choose regional channels, yuntai Settings "whole" says setting all channels 【PTZ Protocol】Yuntai equipment communication protocol It contains these options:Pelco_D、Pelco_P、LILIN、MINKING、STAR、VIDO、NEON、DSCP、HY、N-control、 RM110、SAMSUNG，the default option is Pelco_D. ★Note: yuntai parameter Settings every channel need after completion in Settings of gc1318 alone.
  • Page 25 【Video Mode】Provide PAL and NTSC both formats video formats choice, modify after you must restart your system can take effect. 【Channel】Choose to set the video Settings area passage "whole" says setting all channels 【Reserved Section】Click Settings enter. The white areas for privacy area 【Buzzer Alarm】Happen when video lost choice whether or not to allow buzzer warning 【Alarm Output】Happen when video lost upcoming linkage selected channel corresponding alarm output (3)Motion Detection...

  • Page 26: Network Setup

    4.3 Network Setup (1)General Setup 【DHCP】 After checked automatic assignment device will get IP address, subnet mask, the default gateway, the DNS server, etc 【UPnP】Can choose according to the requirement 【IP Address】Network logic address can according to the requirements set 【Subnet Mask】Server subnet mask 【Default Gateway】Server gateway 【DNS Server】DNS server addresses...
  • Page 27 【Handset Port】Network phones socket, initial socket for eight thousand eight hundred and eighty eight (2)Dial-UP Setup : PPPoE dial-up successful, according to 【 PPPoE IP 】 shown on IP address, users can remote access hard disk video recorder. By nic LAN IP access. The dvr support model：...
  • Page 28 (3)DDNS Setup 【 DDNS Service 】 Dynamic provider website, DDNS server, compatible with SODDNS,ANYVISION,PANSIM, DYNDNS.ORG.if you select soddns, you can customize your favorite domain name.it shows as following picture.
  • Page 29 【DDNS Domain】Dynamic domain name, soft keyboard and hard keyboard can be input. 【DDNS Account】Login domain name service provider website user name 【DDNS Password】Login domain name service provider website password : through the dynamic DNS server. Support dynamic DNS. (4)Email 【SSL Protocol】Sending E-mail in use safety network connection 【Test Email】Send an email to the recipient mailbox test 【Email Address】The recipient's email address.
  • Page 30 According to the customer request can be checked 【Video Setup 】and 【 Motion Detection 】 sending emails. Two can also choose. Note : your sender email must support SMTP. (5)P2P Setup The specific operation of P2P, refer to the eighth chapter “ The cloud function” (6)Access Control 【List Rule】According to the requirement to choose: don't use, allow access, refused to visit.

  • Page 31: System Setup

    4.4 System Setup (1)Time 【 System Language 】 Used in a remote remote device control more hard disk video recorder occasions, only in remote controls address and hard disk video recorder Numbers identical to remote operation. 【Device Number】According to the requirement to select the time zones, has twenty six time zone for user Settings. 【Time Zone】Select the format the date is displayed in including date, sun and moon June 21 years in three formats.
  • Page 32 【Disk Full】When video disk full system how to deal with, "said system will be automatic coverage the earliest video files continue covering video," stop video "says system to stop the current video. 【File Time】Says automatic generation video files interval, the set range 5-120 minutes. 【Recording Bit-rate】Said the total rate of current coding 【Recording Time】Said the storage devices systems installed in accordance with the current bitrate can store video of time.
  • Page 33 user has the largest number of eight, user name may not be repeated. 【User Rights】According to the requirements set of functions need checked 【Add User】 Input need to add user, and input the account password and passwords. According to save button to add user.

  • Page 34: System Management

    【Buzzer Output】In the chosen time intervals have alarm input will start buzzer output. 【Send Email】In the chosen time intervals have alarm input which will send relevant information, such as the alarm events, paparazzi pictures, equipment name, device ID, etc sent to user specifies the mailbox. 【Alarm Output】In the chosen time intervals have alarm input will start alarm output (6)Margin Adjust By the function, you can adjust the distance between the display device and the picture edge.
  • Page 35 Show the system hardware versions, software version, release dates. Click [software upgrade 】, the system began to automatically detect and upgrade file. Note : equipment currently support upgrades: local USB mode, IE mode, the client software. USB mode : former ensure USB device to connect upgrade normal, as upgrade program has copy USB devices in the root directory.
  • Page 36 (3)Default Restoring default can restore selected according to need. The system restore to the default configuration state out, can according to the menu options choose to restore the corresponding Settings. : menu color, language, time date format, video format, IP address, the user account, etc will not be restored.

  • Page 37: Chapter Five Ie Preview

    【Exception Type】Choose abnormalities: hard disk full, hard disk errors, network connection. 【Buzzer】When abnormality, choose whether to allow the buzzer hints. Chapter Five IE Preview logging on interface To input the IP address Pretermission IP address is 192.168.0.20...

  • Page 38: System Settings

    5.2 System Settings Point , As the picture ,You can set up language directory,After all to save you set.

  • Page 41: State Control

    5.3 State control In state control you can set reboot server, close server , remote to go up Remote upgrade: let PC file load in the system Log: to inquire sometime the server’s action...

  • Page 44: Chapter Six Asee Series Phone Software For Use

    Chapter Six Asee series phone software for use 6.1 Asee This module has mainly instructions on the installation and usage in Android, Blackberry, iPhone mobile phone. 1) The acquisition of client software: The client software can be got from the CD material equipped with CD , then choose English and select the options supporting tools, finally choose the mobile phone monitoring or obtained from technical support.

  • Page 45: Instructions Of Android

     The mobile phone client of apple mobile phone system (iOS)can be directly searched for ASee+ in the appstore and installed online.  The mobile phone client of Android system can be directly searched for ASee+ in the Android market and installed online.
  • Page 46 2. Install offline Copy the Asee.apk installation package to Android phone through cable. In the specified directory find out the corresponding .apk, click the application installation (If there is not installed apk installer in the mobilke phone, the user needs to download an apk installation software so that it can identify the apk package), and there will be program icons after finishing installing.
  • Page 47 The functions of buttons show as follows: Table 1-1 Function keys Definition Function specification Play When the program connects with device, play video Capture the current screen(the default save path: the default pictures Capture directory of mobile) Set some information of the device, such as IP address, dynamic domain Settings name, port, username, password and device alias information.
  • Page 48 In <device list>interface, click <Add> button and enter <settings> interface, as shown in the above image Notes：   <DVR Title>：It is convenient to identify among multiple devices.   <Server>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapping before using public IP and mobile phones need to open wifi before using LAN IP).
  • Page 49 Notes：  <Back>：Back to the screen of previewing image.  <Channel List>：It shows the corresponding DVR and the default channel list, the user can arbitrarily choose a channel to preview image.  <Information Edit>：Click this button and enter the “Settings” interface, you can editor delete the device information, as shown in the above image 6）Complete settings, choose channel to preview, and the preview function include two modes: common mode and full screen mode.
  • Page 50 2. Full screen mode is that when mobile phone lay down horizontally it will automatically switch to full screen mode, as shown in the above image 7）Channel switch function Select some channels in the Device List interface, the program will automatically switch to the Preview Interface and open the corresponding channel preview in Preview Interface.

  • Page 51: Instructions Of Blackberry

    6.1.2 Instructions of Blackberry 6.1.2.1 Essential condition 1) Support the version 4.6 or above of Blackberry system, and mobile phone screen resolution is 480*360 and 480*320. Support 8900, 9000, 9700, 9630, 9900 of Blackberry. 2) Support DVR platform versions:  Hisilicon v1.0.1.8 and higher.
  • Page 52 Notes：  <Title>：It is convenient to distinguish between multiple devices.   <Address> ： The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapping before using public IP and mobile phones need to open wifi before using LAN IP). ...
  • Page 53 The corresponding functions of buttons in <Main interface> show as follows: Function keys Definition Function specification Play When the program connects with device, play video Full screen Play full screen. Capture the current image (the default save path: the default pictures Capture directory of mobile) About...
  • Page 54 Zoom out The zoom out control of PTZ. Focal length + Amplify the focal length of PTZ. Focal length - Lessen the focal length of PTZ. Aperture + Amplify the aperture of PTZ. Aperture - Lessen the aperture of PTZ. 6) Exit the application program Click the button <Exit>...

  • Page 55: Instructions Of Iphone

    Menu definition Function specification Set to real-time preview When the program connects with device, play video. New Device Create a new record. Edit Edit record. Delete Delete the selected record. Delete All Records Delete all records. Shutdown Shut down the program. 6.1.3 Instructions of iPhone 6.1.3.1 Essential condition 1) Support the version iOS 3.0 or above, and mobile phones includes iPhone, iPod, touch etc.
  • Page 56 2）Click the program icon Asee+ and the initial interface after running procedure is shown in the above image. The corresponding functions of buttons show as follows: Function keys Definition Function specification Stop When the program disconnects with device, stop playing the video. playing Capture the current image (the default save path: the default pictures Capture...
  • Page 57 Zoom Zoom in/out control of PTZ. Focal length Focal length adjustment of PTZ. Aperture Aperture control of PTZ. 3）Initial usage of need to change the parameter 1.Please click the settings button and enter the device manage interface, as shown in the below image. 2.Then select Add button and enter device add interface, as shown in the above image.
  • Page 58  <Port>：The mobile phone port set in DVR（default parameter is 8888）.  <User ID>：The username permitted to login the DVR（default username is ‘admin’）.  <Password>：The password of the user (default password is empty).  <Max Channel>：The actual channel number of DVR. 3.After finishing, click <OK>, enter <Device Manage>...
  • Page 59 6.Click the button to view all channel numbers, as shown in the above image. 7.Double click any channel, then switch to the <channel preview> interface to preview channels, it can support four channels previewing at the same time, as shown in the below image. 8.Click the <settings>...
  • Page 60 （2）Slide rightly the <edit> button to delete the information. As shown in the above image. 4）Video display mode There are two modes: common mode and full screen mode Switch: when the mobile phone lay down horizontally it will automatically display full screen. common mode full screen mode 5）Channel switch function...

  • Page 61: Instructions Of Symbian

    elected the channel <Channel switch> button in the <preview interface>, the channels group will switch to 5 ~ 8, 8 ~ 12, 12~16 and circulation switch. As shown in the below image. 6.1.4 Instructions of Symbian 6.1.4.1 Essential condition 1) Support the version OS S60 or above of Symbian system. 2) Support DVR platform versions: ...
  • Page 62 2）Click the program icon <Asee>，the first screen after running is shown in the following figure click PTZ show as the following figure The functions of buttons show as follows: Function keys Definition Function specification Play/pause When the program connects with device, play video...
  • Page 63 Capture the current screen(the default save path: the default pictures directory capture of mobile) Set some information of the device, such as IP address, dynamic domain name, settings port, username, password and device alias information. Full screen For this channel full screen. pervious/next Pervious to the former channel,next to the latter channel exit...
  • Page 64 Notes: 1)<server address>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapped before using public IP and mobile phones need to open wifi before using LAN IP). 2)<port>：The mobile phone port set in DVR（default parameter is 8888）. 3)<uer ID>：The username permitted to login the DVR（default username is ‘admin’）.

  • Page 65: Chapter Seven Instructions Of Imac

    图 6-79 Chapter Seven Instructions of imac 7.1 Essential condition 1)Support the version OS X 10.6.3 or above of imac system. 2)Support DVR platform versions: Hisilicon v1.0.1.20 and higher. GRain v8.42 and higher. 7.2 Installation and operation instructions One method: To unzipped the Asee.app in windows xp os, copy it to the mac machine.and then you will find the icon.
  • Page 66 main menu interface After loading，enter default main menu interface,buttons instruction as show below: buttons instruction Button icon corresponding definition function introduction single picture Single picture shows video channel 4 pictures 4pictures show video channels disconnect disconnect single picture of connection disconnect disconnect all pictures of connection Capture...
  • Page 67 add device delete Delete device modify Modify device Switch pictures on Imac platform，click view->scream mode on the top of the screen to switch pictures from 1/4/9/16， as the following figure shows: picture switch First login ,preview interface is empty, need to set parameters and add device,after adding device, can preview, configuration, modify or delete equipment information ect.
  • Page 68 Device name:the name of monitor device,help you distinguish between multiple devices IP address：The public IP address or dynamic domain name of DVR(here the address must be internet address) port：The mobile phone port set in DVR，default parameter is 8888 User name：default username usually to be ‘admin’,can be set according to the DVR . Password：:admin user’s default password is empty，can be set according to the DVR.

  • Page 69: Chapter Eight The Cloud Funtion

    connection play interface If there is error device information above,click to modify or click ,add the device again. Note：Asee on Imac platform can only add one device,and there is no PTZ control function. Chapter Eight The Cloud funtion 8.1 DVR Setup 1.Main MenuNetwork SetupP2P Setup...
  • Page 70 Click the button”Registration” If there is no network, it will prompt”Registration failure”; If you have access to the Internet, it will prompt " registration is successful!”;...
  • Page 71 Click the button “OK”.If success,you will see the following picture. Note:If use the function of P2P, you’d better not use the function of “DHCP”,At the same time to ensure that the IP address is a network IP address , and different with the others..

  • Page 72: Pc Setup

    8.2 PC Setup 1.Opne IE, type http://www.soddns.com in the address bar, and then press enter. If this is the first landing, you should download the control according to your pc system. If the system is xp, click the button “XP DownLoad”; if the system is windows 7,click the button “Win7 DownLoad”. Or let your pc to test and download itself, this maybe takes much more time.
  • Page 73 Click the button “Run” or “save”; Click the button “Run”;...
  • Page 74 Click the button “Next”; Click the button “Install”;...
  • Page 75 Click the button “Finish”; Note: If finish, you should reboot the pc.
  • Page 76 ★ Domain Name /Device ID：you can look up the device id of this dvr ,above device’s id is 10257027; ★ Net Port：5050; ★ DVR Username：admin; ★ Password：null; Note:the username and password are the same as the local DVR’s 2.Type the information, and then click the button”login”;...

  • Page 77: The Other Operation Of Pc

    If you want to view all the channel ,you can view one by one ,or view all the channel by click the button”start”; 8.3 The other operation of PC 8.3.1 User Login...
  • Page 78 (1) local login Logout: logout the current user ★ Cancel:cancel the operation ★ (2) cloud login Username: The account can manage multi device ID ★ Password: Manage user password ★ Auto-login: when you select this option, open www.soddns.com, automaticlly login ★...
  • Page 79 Registration page Successful registration information 8.3.2 Server List: shows the currently logged in equipment 8.3.3 Device Manager...
  • Page 80 DEVICE NAME: The name of the device ★ NET ADDRESS: Enter the ID of the device ★ NET PORT: Default 5050 ★ MOB PORT: Default 8800 ★ ★ DEV PORT: Default 5040 ★ USER: Default admin ★ PASSWORD: Default null ★...
  • Page 81 8.3.5 Remote Output Control 8.3.6 Remote Color: you can adjust the color of each channel,you will see it in the following picture ★ Default: Set the current color to the initial values...
  • Page 82 8.3.7 Remote Playback ★ Type: it include “All”,”Manual”,”Auto”,”Alarm” ★ Chn: slecet the playback channel ★ Search: search the files and display the results ★ Hide: hidden the file directory ★ Show FileList: shows the last retrieved file derectory...
  • Page 83 ★ Playback: double click the file, and then playback ★ Backup: In the file list, select one file, click the right mouse, then click backup, it will pop-up “Save as ” dialog.
  • Page 84 8.3.8 Window Select:you can switch between the single-screen, four, nine, siteen images...
  • Page 85 8.3.9 Taskbar...

  • Page 86: Chapter Nine The Use Of P2P Phone Software Nvplayer

    Chapter nine The use of P2P phone software Nvplayer This manual has mainly instructions on the installation and usage in Android and iPhone mobile phone. 1) The acquisition of client software: The client software can be got from the CD material equipped with CD . Each type of corresponding client software as follows.
  • Page 87 1. Install offline Copy the NVPlayer.apk installation package to Android phone through cable. In the specified directory find out the corresponding .apk, click the application installation (If there is not installed apk installer in the mobilke phone, the user needs to download an apk installation software so that it can identify the apk package), and there will be program icons after finishing installing.
  • Page 88 1）Click the program icon <NVPlayer>，the first screen after running is shown in the following picture. Notes：  <Add>: Here you can add multiple devices.  <Edit>：Here you can edit the devices,such as delete one device in the server list. <Login>：Some devices landing. ...
  • Page 89  <Search>：Search mobile devices within the lan, currently only supports searching IPC.  <Server List>：Display the current list of the servers that have been added. 2) In <server list>interface, click <Add> button and enter <Add Device> interface, as shown in the followong picture.
  • Page 90 Click one of them, it will show the following picture. The functions of buttons show as follows: Function keys Definition Function specification Pause When the program connects with device, pause video Go to the previous level.

  • Page 91: Instructions Of Iphone

    Previous group It can show the previous channels group. Next group It can show the next channels group. Choose one video channel of the device. And cooperate with "next Select channel group" can switch 5-8,9-12,13-16 and so on. 9.2 instructions of iPhone 9.2.1 Essential condition 1)Support the version ios4.3 to ios6.1 of IPhone system.
  • Page 92 2. Install online Run the App Store program of iPhone. Switch to the search tag page, and input Nvplayer in the search box to find the application installation package, then click <install> .After finishing installation, there will be Nvplayer program icon on the mobile phone desktop, as shown in the above picture.
  • Page 93 Notes： <Add>: Here you can add multiple devices.  <Edit>：Here you can edit the devices,such as delete one device in the server list.   <Login>：Some devices landing.  <Search>：Search mobile devices within the lan, currently only supports searching IPC. ...
  • Page 94 Notes：  <Name>：Name easy to distinguish multiple devices,name can be the same as the server.  <Server>：In the P2P interface of the DVR, click the button “registration”, it will create one device ID, you can copy the ID to here. ...
  • Page 95 Click one of them, it will show the following picture. The functions of buttons show as follows: Function keys Definition Function specification...

  • Page 96: Chapter Ten Faq (Frequently Asked Questions)

    Pause When the program connects with device, pause video Go to the previous level. Previous group It can show the previous channels group. Next group It can show the next channels group. Choose one video channel of the device. And cooperate with "next Select channel group"...
  • Page 97 DVR reboot; ② Please check the power supply of DVR, if you installed a lot of hard disk drive, it may be reboot repeatedly underpower; ③ Please pull up the network cable, then to check the DVR can work normally or not, being the catastrophe failure in network, it will cause the DVR reboot repeatedly;...
  • Page 98 ②The record video file locates where there is a bad sector in a hard disk drive, it will cause the mosaic raising; Postscript 1 D1、CIF models Product parameter Table 16CH 24CH 32CH Compress H.264 baseline profile@L3.1 standard Video in （1.0Vp-p/75Ω） （1.0Vp-p/75Ω）...
  • Page 99 record record record record record Record，Play， Record，Play， Record，Play， Record，Play， Record，Play， Mult mode Internet Internet Internet Internet Internet HDMI: HDMI: HDMI: HDMI: HDMI: Hd interface 1080P(1920*108 1080P(1920*108 1080P(1920*108 1080P(1920*108 1080P(1920*108 Network RJ45(10M/100M/ RJ45(10M/100M/ RJ45(10M/100M/ RJ45(10M/100M) RJ45(10M/100M) interface 1000M) 1000M) 1000M) ASEE: symbian、Android、iphone、Blackberry and so on; Mobil platform Nvplayer：Android,iphone and so on.
  • Page 100 disc） disc） disc） disc） disc） （Kg） Postscript 2 960H Model Product parameter Table 16CH Compress H.264 baseline profile@L3.1 standard Video in BNC（1.0Vp-p/75Ω） BNC（1.0Vp-p/75Ω） BNC（1.0Vp-p/75Ω） 1TV BNC（1.0Vp-p/75Ω）/ 1TV BNC（1.0Vp-p/75Ω）/ Video out 1TV BNC（ 1.0Vp-p/75Ω） / 1VGA 1VGA 1VGA PAL(960×576)， PAL(960×576)， PAL(960×576)， Picture standard NTSC(960×480) NTSC(960×480)
  • Page 101 Hd interface HDMI: 1080P(1920*1080) HDMI: 1080P(1920*1080) HDMI: 1080P(1920*1080) Network RJ45(10M/100M) RJ45(10M/100M) RJ45(10M/100M/1000M) interface Mobil platform Naway.CAB；symbian v3；symbian v5；Naway-Android；iphone，Blackberry RS485 PTZ control PTZ control PTZ control Communication RS485×1，USB2.0×2 RS485×1/2，USB2.0×2 RS485×1/2，USB2.0×2 port Hard Disc SATA×1/2（maximum 4T） SATA×1/2/4（maximum 4T） 2/4/8SATA（maximum 4T） Usb mouse， Usb disc backup、 Usb mouse，Usb disc backup、...
  • Page 102 PRODUCT WARRANTY CARD All the products sold are covered by 12months warranty from the date of invoice. Warranty instructions： 1. Please contact us when the product is caused by its own fault within 1year warranty. 2. Please mail us your written warranty card as soon as possible after purchasing our products so that we can repair or replace this product to its original operation condition.

This manual is also suitable for:

Vcs-hdcvi

Table of Contents