Display Settings; Disc Naming (Dnps); Auxiliary Input Display Setting - Kenwood KDC-BT8041U Instruction Manual

Display Settings

Disc Naming (DNPS)

Attaching a title to a CD.
1
Play the disc you want to attach a name to
2
Select Name set mode item during Menu
mode
Select the "Name Set" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
3
Enter Name set mode
Press the Control knob for at least 1 second.
4
Enter the name
Operation type
Move the cursor to the enter
character position
Select the character type*
Select the characters
* Each time you press the knob, the character type
alternates between the types shown in the table below.
Character type Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
⁄
• Enter characters by using a remote control with numbers
buttons.
Example: If you are entering "DANCE".
Character "D"
Button
[3] [
Times pressed
1
5
Exit Menu mode
Press the [FNC] button.
⁄
• A title cannot be attached to Audio file media.
• When operation stops for 10 seconds the name at that
time is registered, and Name Set mode closes.
• Media that you can attach a name to
- Internal CD player: 10 discs
• You can change the name of a CD by the same
operation you used to name it.
Operation
Push the Control knob towards right
or left.
Press the Control knob.
Turn the Control knob or push it
towards up or down.
"A" "N" "C"
¢ ¢ ¢ ¢
] [2] [ ] [6] [ ] [2] [ ] [3]
1 2 3

Auxiliary Input Display Setting

Selects the display below when changing to
Auxiliary input source.
1
Select Auxiliary input display setting item
during Menu mode (In AUX mode)
Select the "Name Set" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
3
Select the Auxiliary input display
Turn the Control knob or push it towards up or
down.
"AUX"/ "DVD"/ "PORTABLE"/ "GAME"/ "VIDEO"/ "TV"
4
Exit Auxiliary input display setting mode
Press the [FNC] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
"E"
2
English
9
|