Power Led Connector; Tips On Installing The Motherboard In Chassis - TYAN Tomcat K8S S2850 User Manual

2.14 – Power LED Connector
2.15 – Tips on Installing the Motherboard in Chassis
Before installing your motherboard, make sure your chassis has the necessary motherboard
support studs installed. These studs are usually metal and are gold in color. Usually, the chassis
manufacturer will pre-install the support studs. If you're unsure of stud placement, simply lay the
motherboard inside the chassis and align the screw holes of the motherboard to the studs inside
the case. If there are any studs missing, you will know right away since the motherboard will not be
able to be securely installed.
Some chassis include plastic studs instead of metal. Although the plastic studs are usable, Tyan
recommends using metal studs with screws that will fasten the motherboard more securely
in place.
Below is a chart detailing what the most common motherboard studs look like and how they should
be installed.
Pin_1
Pin_3
Note: For some chassis with 3-pin
cable.
16
http://www.TYAN.com
PIN_1 PWR LED (+)
PIN_2 NC
PIN_3 PWR LED (-)