ELPRO TPA110 SERIES Installation And Use Manual page 6

TPA110
series
The jumpers are identified as W1 and W2
TPA 110 IRT
W1: TTL
ANALOG
W2: LoZ (Low impedance):
HiZ (High impedance)
The most frequent cases are as follows
-IR receiver with power output
-IR receiver with TTL output
The factory setting is as follows:
W1: ANALOG
W2: LoZ
CAT5/6 VIDEO, AUDIO & IR TRANSCEIVERS
: IR receiver with TTL output
: IR receiver with analog output
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
: IR receiver with power output
: IR receiver with high impedance output
: position W1= ANALOG; W2= LoZ
: position W1= TTL;
Tel.+39 0119348778 - FAX +39 0119348779
TPA 110 IRR
W2= HiZ
ELPRO Video Labs s.r.l.
6