Advertisement
TPA110
series
Presence of the incoming video signal is also indicated by a relais whom contacts
are available to the terminals VIDEO.
Drawing represents the released contacs.
For other information regarding connection, refer to paragraph 4.3
For the stereo audio signal, losses due to the cable are not so significant as for
the video signal.
However, for long sections of cable, the output level of the audio signal must be
calibrated in order to compensate for losses due to the cable.
To do this, turn the LEVEL L and R trimmers in a clockwise direction until the
audio signal level reaches that desired.
ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
19
Tel.+39 0119348778 - FAX +39 0119348779
CAT5/6 VIDEO, AUDIO & IR TRANSCEIVERS
Advertisement
