Switching Display; Station/Disc Naming (Snps/Dnps); Auxiliary Input Display Setting - Kenwood KDC-3025 Instruction Manual

General features

Switching Display

Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display
switches as shown below.
In Tuner source
Information
Station name
Frequency
Clock
In CD & External disc source
Information
Disc title (In External disc source)
Track title (In External disc source)
Track number & Play time
Disc name
Clock
In Auxiliary input source
Information
Auxiliary input name
Clock
• If the Disc title or Track title is selected when the disc
which does not have Disc title or Track title is played,
track number and play time are displayed.

Station/Disc Naming (SNPS/DNPS)

Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to
attach a title to
• A title can't be attached to an MD.
• Refer to the 'Switching Display' (page 10) and select
either "DNPS" or "SNPS".
2
Enter name set mode
Press the [NAME.S] button for at least 2
seconds.
"NAME SET" is displayed.
3
Move the cursor to the enter character
10
|
English
Display
"SNPS"
"BAND+F"
Display
"D-TITLE"
"T-TITLE"
"P-TIME"
"DNPS"
position
Press the [ ] or [
4
Select the characters
Press the [FM] or [AM] button.
• Characters can be entered by using a remote with a
number buttons.
Example: If "DANCE" is entered.
Character Button
"D" [3]
"A" [2]
"N" [6]
"C" [2]
"E" [3]
5
Repeat steps 3 through 4 and enter the name.
6
Exit name set mode
Press the [NAME.S] button.
• When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.
• Memory numbers
- FM: 28 stations
- AM: 10 stations
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• The title of station/CD can be changed by the same
operation used to name it.

Auxiliary Input Display Setting

Selecting the display when this device is switched
to Auxiliary input source.
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX1" display.
2
Enter Auxiliary input display setting mode
Press the [DISP] button for at least 2 seconds.
The presently selected AUX Name is blinks.
3
Select the Auxiliary input display
Press the [ ] or [
Each time the button is pressed it switches
through the below displays.
• "AUX1"
] button.
Times pressed
1
1
2
3
2
] button.