Table Of Contents; Packing - Makita EK7300 Instruction Manual

Thank you for purchasing a MAKITA product!
Congratulations on choosing a MAKITA Power Cut cutoff saw!
We are conÞ dent that you will be satisÞ ed with this modern
piece of equipment. Like our chain saws, the MAKITA Power
Cuts feature specially designed high-performance engines
with outstanding power-to-weight ratios, for heavy-duty yet
lightweight tools.
Other advantages of the MAKITA Power Cuts:
• Sturdy construction and high reliability.
• Maintenance-free electronic ignition, hermetically sealed to
protect against dust and moisture.
• Vibration damping with the MAKITA 2-mass system (D2M) for
tireless working even when guiding the Power Cut by hand.
• Five-stage air-Þ lter system for reliable working even under
very dusty conditions.
• Two options for mounting the cutter attachment: Either cen-
trally, for good balance when guiding the unit manually, or on
the side, for ß ush cuts along walls or curbsides or horizontally
directly above the ground.
• Extensive range of resin-bonded and diamond grit cutting
discs, trolley with dust catcher, and systems for supplying
water to the disc.
The following industrial property rights apply: DE 20013210,
DE 19737657, DE 20301182, DE 102006056924, DE
102009014688, DE 202011000529, DE 202011000531, DE
202011000534, US 5709594.
We want you to be satisÞ ed with your MAKITA product.
In order to guarantee the optimal function and performance of
your Power Cut and to ensure your personal safety we would
request you to perform the following:
Read this instruction manual carefully before putting the
Power Cut into operation for the Þ rst time, and strictly
observe the safety regulations! Failure to observe these
precautions can lead to severe injury or death!
Important information for people with pacemakers
During operation, this device emits a weak electromagnetic
Þ eld. We cannot guarantee that this will not have an inß uence
on heart pacemakers.
To prevent malfunctions and associated health risks, before
using this tool you should consult the pacemaker manufactur-
er or your physician.
2

Table of contents

Packing ................................................................................ 2
Delivery inventory .............................................................. 3
Symbols ............................................................................... 3
SAFETY PRECAUTIONS
Intended use ................................................................... 4
General precautions ....................................................... 4
Protective equipment ...................................................4-5
Fuels / Refuelling ............................................................ 5
Putting into operation ...................................................... 5
Cutting discs ................................................................... 6
Kickback and lock-in ....................................................... 7
Working behavior / Method of working ............................ 7
Always observe the following when using
synthetic resin cutting discs ............................................. 8
Cutting metal ................................................................... 8
Cutting masonry and concrete .....................................8-9
Transport and storage ..................................................... 9
Maintenance ................................................................. 10
First aid ......................................................................... 10
Disposal and environmental protection ......................... 10
Technical data ................................................................... 11
Denomination of components ......................................... 12
PUTTING INTO OPERATION
Mounting the cutting disc ............................................... 13
Tightening the V-belt / Checking V-belt tension ............ 14
Fuels / Refuelling .....................................................14-15
Starting the engine ........................................................ 16
Cold-starting ................................................................. 17
Warm-starting ............................................................... 17
Stop engine ................................................................... 17
Adjusting the carburetor .................................................. 18
MAINTENANCE
Changing the V-belt ...................................................... 19
Cleaning the protection hood ........................................ 20
Cleaning / changing the air Þ lter ..............................20-21
Replacing the spark plug .............................................. 22
Replacing the suction head .......................................... 22
Replacing the starter cable ........................................... 23
Replacing the return spring ........................................... 24
Replacing / cleaning the spark arrester screen ............. 26
Instructions for periodic maintenance ........................... 28
Cutting attachment in central / side position ................. 25
Repositioning the cutting attachment .......................25-26
SPECIAL ACCESSORIES
Diamond cutting discs, trolley, water tank
and pressure water system ............................................ 27
Service, spare parts and guarantee ................................ 28
Troubleshooting ............................................................... 29
Extract from spare parts list .......................................30-31
Accessories .................................................................. 31
EU Conformity Declaration ............................................... 31

Packing

Your MAKITA Power Cut is packed in a cardboard box to pr e-
vent shipping damage.
Cardboard is a basic raw material and is consequently reuseable
or suitable for recycling (waste paper recycling).
Page