Summary of Contents for Vienna Acoustics CONCERT GRAND SERIES
Page 1
Your Vienna Acoustics Team CABINETS Our speaker designs feature massive and inert cabinet construction. Vienna Acoustics cabinets are designed with the latest computer modelling techniques and use a combination of amorphous materials in order to ensure that they are both stiff and well damped.
Page 2
CONNECTIONS The massive Vienna Acoustics input terminals are designed to accept banana plugs, spade terminals or bare wire connec-tion. Make certain that all connections are well tightened since poor contact between speaker cable and input connector can lead to degradation of sound quality.
Page 3
Many people will simply find it undesirable or disruptive to place speakers in "free space", that is well away from the back wall. Vienna Acoustics loudspeakers may be set-up close to a rear wall, though keep in mind that less toe-in, as described below, will probably be needed.
Page 4
DISTANCE BETWEEN THE SPEAKERS AND TOE-IN Most stereo systems are set-up with their speakers too close together. As a rough guideline, the distance between spea-kers should be about 70 % of the room width as a starting point, assuming that your speakers are aiming down the length of the room. Too close together they will create "ghost"...
Page 5
Some rooms however are very difficult to handle (or your preferred position is pre-determined), in these cases the BCUs are wonderful room tuning devices. Happy Listening! Your Vienna Acoustics Team...
Need help?
Do you have a question about the CONCERT GRAND SERIES and is the answer not in the manual?
Questions and answers