Table of Contents
Advertisement
7.
Check to see if the two parts move freely by pushing the top plate of the carbon
brush into the recess on the bottom of the carbon brush cap and rotate.
Carbon Brush and Cap
8.
If the two parts stick together, replace the carbon brush cap and repeat step 7.
9.
If the top plate of the carbon brush sticks in the new cap, you need to replace the
carbon brush and repeat step 7.
10.
Keep trying until carbon brush top plate can move freely inside of the recess on the
bottom of carbon brush cap.
11.
When the correct match is found, install in the tool.
RECOMMENDED ACCESSORIES
Alpha
Plus
®
The ultimate diamond blade for cutting granite,
marble, natural and engineered stone, ceramic tile
and other hard materials. Made with the highest
quality diamonds and matrix for long life and chip-
free cutting. The high performance turbo rim helps
get the job done
fast!.
24
Top Plate
Figure-28
Advertisement
Table of Contents
