Table of Contents
Advertisement
1
1
.
.
Turn off the computer and disconnect the AC adapter and all peripherals.
2
.
2
.
Turn the notebook over so that the rear ports are facing you and locate the
memory module compartment.
3
.
3
.
Remove the screws that secure the RAM module compartment cover and set it
aside in a safe place.
4
.
4
.
Remove the compartment cover and then angling it up and out.
5
.
5
.
If you need to install a higher capacity module, gently push the edge clips on both
sides to release the module. Angle the card slightly upward and gently slide it from
its edge connector slot. Store the card in the anti-static bag that contains your new
module(s).
6
6
.
.
To install the new memory card, hold the card with its gold edge connector toward
the edge connector slot of the compartment. To help you orient the cards, the
edge connector has been made with two unequal-length sections. You will only be
able to insert the card in one direction.
79
Advertisement
Table of Contents
