Samsung Galaxy S4 User Manual page 190

Note: The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
13. If the TV turned on, tap Yes, this code 1 works.
– or –
If the TV did not turn on after tapping
waiting 10 seconds, tap No, test next code 2. Another
code will be sent.
14. From the Select your channel source screen, select the
entry that corresponds to your current channel control
method:
• Set-top Box: selected when changing channels is done via a
receiver box. Channels are not changed via the TV remote but
rather through the receiver/box.
• My xxx TV: selected when a signal is fed directly into the TV
and no box is used. Channels are changed directly on the TV by
using the TV remote and not a box's remote.
Note: Try matching your current channel selection method.
183
15. Select the Satellite Box Brand from the available list.
Important! You must configure your set top box for IR
(Power) and
16. When prompted to Enable IR, tap More Info.. to learn
17. Only after completing the IR setup process and
Note: This IR programming of your set top box is a one-time
process and once successful should not need to be
repeated.
18. If prompted to personalize your experience, follow the
®
For example, DirectTV .
• If your brand does not appear in the list, tap Other Satellite
Box Brands and follow the on-screen instructions.
communication with your device. If you do not
select More Info.. below and follow the on-screen
instructions you may not be able to properly use
the application.
how to configure your set top box to receive and
respond to IR controls.
programming your box, press
on-screen instructions.
.