Related Manuals for Versitron S7085x
Summary of Contents for Versitron S7085x
- Page 1 S7085x 8-Port 10/100 Fast Ethernet Switch Installation Guide Copyright January 2003 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702 www.versitron.com...
- Page 2 EMC directive of the European Community. Such marking is indicative that this equipment meets or exceeds the following technical standards: EN 55022/CISPR 22 Class B EN 55024 – EN61000-3-2, EN61000-3-3, EN61000-4 series www.versitron.com...
-
Page 3: Table Of Contents
Table of Contents Introduction................ 4 Features..................5 Specifications................6 Installing the Switch............8 Unpacking..................8 Checking AC Power ..............8 Installing the Switch ..............9 Making Network Connections .......... 10 Switched Ports ................10 Making UTP Connections ............10 Making Fiber Connection............11 LED Indicators..............12 LED Panel..................12 Interpretation................12 www.versitron.com... -
Page 4: Introduction
. Fiber Uplink Support: With 100BaseFX port, the switch provides connectivity to a Fast Ethernet network via fiber cable. . Easy Installation: With the functions of auto-speed-sensing and auto-negotiation on each port, the switch supports plug-and-play installation which eliminates configuration problems. www.versitron.com... -
Page 5: Features
. Store and forward switching to ensure only good packets are forwarded . Forwarding and filtering at full wire speed . Supports IEEE 802.3x flow control for full-duplex operation . Supports back-pressure flow control for half-duplex operation . Comprehensive LED indicators provide quick, easy to read port and switch information www.versitron.com... -
Page 6: Specifications
Relative humidity 10% to 90% non-condensing Dimensions 180mm x 114mm x 26mm (WxDxH) 7.08 x 4.49 x 1.02 inch DC IN jack Rating +7.5V/1A, D6.3mm D2.0mm DC IN voltage Operating +6.0V ~ +12.6VDC (Device DC input) Consumption DC input power consumption 6.3W @+7.5V www.versitron.com... -
Page 7: Fx Port Optical Specifications
Rx Power S70853 1310nm -19~ -14dBm -31dBm min.-14dBm max. S70854 1310nm -19~ -14dBm -31dBm min.-14dBm max. S70855-2 1310nm -15~ - 8dBm Sensitivity -33dBm max. S70855-5 1310nm -5~ 0dBm Sensitivity -35dBm max. S70855-7 1310nm 0~ + 5dBm Sensitivity -37dBm max. www.versitron.com... -
Page 8: Installing The Switch
. AC input power: AC power voltage of your area . DC output power: +7.5VDC 1A min. . DC plug type: The DC power socket for the AC power adapter is located on the rear of the switch as shown below: www.versitron.com... -
Page 9: Installing The Switch
2.3 Installing the Switch 1. Install the switch with the AC power adapter provided. 2. Connect the power adapter cable to the switch before connecting the adapter to the AC outlet. www.versitron.com... -
Page 10: Making Network Connections
Tx pair and Rx pair internally. With this function, straight-through cable can be used for any connection. MDI to MDI-X connection rule is not necessary anymore. You can use just straight- through type cable for all your connections. www.versitron.com... -
Page 11: Making Fiber Connection
Network card half-duplex fiber port 400 m Network card full-duplex fiber port 2 km Class I hub half-duplex fiber port 160 m 2 Class II hub half-duplex fiber port 112 m Switched half-duplex fiber port 400 m Switched half-duplex fiber port 2 km www.versitron.com... -
Page 12: Led Indicators
LNK/SPD/ACT Blink Green Speed 100M, link up, Tx/Rx activities LNK/SPD/ACT Blink Amber Speed 10M, link up, Tx/Rx activities LNK/SPD/ACT ------- Link down DUP/COL Green Full duplex mode DUP/COL ------- Half-duplex mode, no collision DUP/COL Blink Green Half-duplex mode, collisions www.versitron.com...
Need help?
Do you have a question about the S7085x and is the answer not in the manual?
Questions and answers