Kenwood D-S300 Instruction Manual page 10

1 0
Graphical Remote Control Unit (GRC)
This instruction manual for this model also covers the systems in the KENWOOD System "SERIES 21" lineup. Since the features
vary depending on the combined systems, the remote control operation illustrations (icons) are shown for two types of remote
control units.
To avoid a confusing and difficult-to-follow explanation of the graphical remote control unit, a simplified explanation is
provided using the operating instructions for a general remote control unit. Please reread the operating instructions while
referring to the main differences below.
Operations with the general remote control unit are indicated by
Operations with the graphical remote control unit are indicated by
REMOTE CONTROL UNIT
RC-S0504
RC operation
Key
Press
Press the ** key
6
P.MODE
GRC operation Text replacement or actual operation
Icon
Select Select and press the ENTER key.
Select the ** icon and press the ENTER key.
Select the ** icon
Use
ENTER
Mode
ENTER
Use
PGM
ENTER
P.mode
ENTER
Use
Return
ENTER
*3
Use
*1: Icons with shading are input when the ENTER key is pressed.
*2: Icons without shading send you to another menu screen (level) for the next operation. At the new
menu screen, you can select the desired icon.
*3: To return to the previous menu screen (level), select the Return icon, and press the ENTER key.
RC operation
GRC operation
to select
ENTER
*1
to select Mode
ENTER
*2
to select PGM
ENTER
P.mode
to select
ENTER
Operation of remote control unit
Input
Main Menu
Source
ENTER
CD Tuner LD Tape1 TapeA
Return Set Up Confirm
Cable Sat. TV VCR1 VCR2 TapeB
CD
Track 00
10key
Pad
Mode
REMOTE CONTROL UNIT
.
.
and press the ENTER key.
and press the key.
ENTER
and press the key.
ENTER
and press the key.
ENTER
D-S300 (En)
VOLUME
MUTING
ON /STANDBY