Install The Software - TQC USB Digital Microscope User Manual

3. Install the software

Connect the Microscope to Computer! The microscope
must be connected to computer before installing the
software.
Insert the driver CD into CD-ROM Drive and this will
automatically display the following interface:
1). Install the driver by clicking install Microscope Driver
The Install Shield Wizard will walk you through the
whole process. Click on the "Next" button to continue.
2). Install the MicroCapture software
Click MicroCapture Software and then reboot the
system when asked.
3). you can browse the User's manual in PDF format and
the CD contents by choosing the corresponding menus.
7
EN