Insignia NS-L55X-10A Quick Setup Manual

55" 1080p LCD HDTV

QUICK SETUP

GUIDE
NS-L55X-10A 55" LCD TV
Thank You
for purchasing this fine Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Component cable Audio AC power Remote control
cable cord and
2 AA batteries
Remote control holder Cleaning cloth
Quick Setup Guide
Front features
Light sensor
Power/standby indicator Remote control sensor
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Remove the four screws holding the TV to its stand.
3 Remove the stand column.
4 Secure the wall-mount bracket to the back of your TV using the screws and
spacers provided with the wall mount.
Setting up your remote control
1 While pressing the release button on the battery compartment cover on the
back of the remote, lift the cover off the remote.
2 Insert two AA batteries into the battery compartment. Make sure that the +
and – symbols on the batteries align with the + and – symbols in the battery
compartment.
3 Replace the cover.
Programming your remote control
To program your existing universal remote control to work with your new
Insignia TV, see the table below for common codes. If you have problems
programming your remote or need a different remote control code, visit
www.insigniaproducts.com for the latest remote control code information.
Universal remote control TV codes
(for all Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models Set-top box makers and models
Philips
RCA One for All Sony Comcast Dish Network Motorola TIVO
PHDVD5, PH5DSS,
RCU807 URC-6690 RM-VL600 M1057 VIP508, VIP622 DRC800 Series 3, HD
PMDVR8, PDVR8
115 135 0464 8043 0463 720 0463 0091
Connecting a DVD or Blu-ray DVD player, cable box,
satellite receiver or, game station
Volume + / -
Using HDMI (best)
Channel /
Menu
Input source select
Game
Power on/standby
Using component (better)
DirectTV
RC23
10463
Using composite (good)
Connecting an antenna
Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back of
your TV and the RF OUT jack on the antenna.