Icon Q Boundless S3 User Manual page 5

Steps:
1. Make sure the speaker is charged. Turn on the speaker.
2. The indicator light by the power button will flash red
and blue rapidly. The speaker is in pairing mode. (If nec-
essary, hold the Play/Call button on top of the speaker
until the indicator light starts to flash red and blue).
3. Turn on your Bluetooth device and ensure its Bluetooth
function is activated. You will find this option on most
devices under Settings or Options.
4. Follow your device's instructions to search for Blue-
tooth devices. After a few seconds, your Bluetooth
device will list the speaker as a discovered device. The
speaker ID is "Boundless S3".
5. Select the Boundless S3 to pair the two devices. If asked
for a passcode, enter "0000".
6. A tone will sound and the indicator light will flash blue
intermittently. Your Bluetooth enabled device has been
successfully connected.
C. PAIRING DEVICES USING NFC
If you have an NFC enabled device, you can take advan-
tage of the Boundless S3's NFC function for easier and
quicker pairing. NFC lets you pair devices almost instanta-
neously by simply tapping them together.
1. Make sure the speaker is charged. Turn on the speaker.
2. The indicator light by the power button will flash red
and blue rapidly. The speaker is in pairing mode.
3. Turn on your device and ensure its Bluetooth and NFC
5