Introduction Welcome to your new Boundless S4. We hope you enjoy using it as much as we do. Before using your product, we strongly encourage you to fully read through this user guide. This guide will help you operate your new wireless speaker with Bluetooth®.
III. Unit at a Glance 1. Decrease volume / Previous 5. NFC track 6. Power/Indicator light 2. Increase volume / Next track 7. AUX input 3. Bluetooth: Pair / Play / 8. Micro USB port Pause / Call 4. Microphone...
IV. Usage CHARGING YOUR DEVICE The Boundless S4 offers convenient charging via a micro USB port. For best sound quality, you must charge the product fully before using it for the first time. Steps: 1. Find the USB cable included with this product.
Page 5
The speaker ID is “Boundless S4”. 5. Select the Boundless S4 to pair the two devices. If asked for a passcode, enter “0000”. 6. When the indicator light flashes blue only, it means your Bluetooth-compatible device has been success- fully connected.
Page 6
vated. Then, turn on your device’s NFC function. You will find these options on most devices under Settings or Options. 4. Place your device against the NFC logo on top of the- speaker, and hold briefly. When your device goes into automatic pairing mode, accept the Bluetooth pairing with the speaker.
AUX INPUT In addition to playing audio via Bluetooth, this product also supports AUX input. To use, connect a 3.5mm line-in cable from the speakers to any device with a headphone jack or audio output. The speaker will automatically start playing audio from the connected device.
Need help?
Do you have a question about the Boundless S4 and is the answer not in the manual?
Questions and answers