Installation Notes - Damani DCG6W User And Installation Instructions Manual

INSTALLATION INSTRUCTIONS

INSTALLATION NOTES

1. Cut the aperture to the dimensions shown below or use the template if printed on the packaging.
2. Invert the Hob and apply the sealing agent provided to match the outer perimeter edge.
3. If the sealing agent is a strip type, the protective covering must be removed from both sides.
Do not leave a gap in the sealing agent or overlap the thickness.
NOTE: do not use any Silicone based sealant, as this can damage the worktop surface if
repairs are required.
4. Insert the appliance into the aperture and fix in position via the clamps & screws, tightening
the screws evenly (see fig. below).
MODEL A
DCG6W 560 480 500 585
DCG6S 560 480 500 585
DCG6FS 560 480 500 585
DCG64WS 560 480 500 585
DCG64WFS 560 480 500 585
DCG75WS 560 480 500 685
DCG75WCS 560 480 500 685
DCG95WS 830 480 500 860
DCG95WCS 830 480 500 860
DACG7501 560 480 510 740
DACG7502 560 480 501 740
HOB APERTURE DIMENSIONS
B C D E
30
30
30
30
30
30
30
30
30
30
30
9