Installation Requirements; General; Earthing Instructions - Whirlpool AVM595 WH Service Manual

WHIRLPOOL CONSUMER SERVICES
Models AVM595 WH
AVM595 BL
Page 5 of 14

INSTALLATION REQUIREMENTS

GENERAL

The oven should be placed on a flat and stable surface
Place the oven away from high temperature and steam sources.
Clearance of at least 50mm on each side must be provided to allow adequate ventilation.
The microwave oven must be plugged directly to a 3-pin wall receptacle which is properly
earthed.
The power source must be 230 - 240V 50Hz 10A single phase.

EARTHING INSTRUCTIONS

IMPORTANT:
DISCONNECT POWER BEFORE SERVICING, RECONNECT ALL EARTHING
DEVICES.
All mechanical parts of this appliance capable of conducting electricity are earthed. In the
event of an electrical short circuit, earthing reduces the risk of electric shock. This appliance is
equipped with a cord having an earthing wire with a earthed plug. The plug must be plugged
into an outlet that is properly installed and earthed.
WARNING:
IMPROPER USE OF THE EARTHING PLUG MAY RESULT IN ELECTRICAL
SHOCK.
If earthing wires, screws, straps, clips, nuts or washers used to complete a path to earth are
removed for service, they must be returned to their original positions and properly fastened.
EARTHING SPECIFICATION:
Leakage current: 0.5mA max.
Earth path resistance:0.1 ohm max.