installation & connection
connectinG witH otHer Device
ethernet connection
Connect the Ethernet cable to the local network or to the Internet.
power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
Be careful not to reverse the polarity when you connect the power cable.
`
J
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
If PoE and DC 12V are both applied, this camera will get supplied with power from PoE.
`
Please make sure the monitor and camera are turned off when connecting them.
`
16_ installation & connection
Power
Ethernet