Check Digital Tv Signal; Update Channels Automatically - Panasonic Viera TH-P42X10Z Operating Instructions Manual

Tuning Channels
Normally use "Digital TV Auto Tuning" or "Update Channel List" to update Digital TV channels on your channel
list.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
Digital TV Manual Tuning
Physical Channel
Analogue Scan Signal Quality
Signal Strength
No. Channel Name
Digital TV: 0 Radio: 0
Manual Tuning
Set Analogue TV channel manually after Analogue TV Auto Tuning.
●
If a VCR is connected only with the RF cable, select channel position "0".
Analogue TV Manual Tuning
1 BBC1
Manual Tuning 1
Select a channel position
You can add new channels, delete duplicated channels, update channel name and position automatically to
Channel List.
Digital TV Update Channel List
Analogue Scan Scan
This will take about 3 minutes.
RF Ch Channel Name
Digital TV: 0 Radio: 0
Selects a channel and checks the Digital TV signal condition.
●
To change the channel
Digital TV Signal Condition
Channel Name
Signal Quality
Signal Strength
Network Name
RF Parameter
30
Set Digital TV channel manually
MHz
[CH21] 474.00
21 0 10 68
0 10
Type New
Set Analogue TV channel manually
CH33
120
CH33

Update channels automatically

●
CH21 21 69 68
Type Quality
Searching

Check Digital TV signal

101 DZFinfokanal
0 2 4 6 8 10
RiksTV
[CH21] 474.00MHz
Digital TV Manual Tuning
select physical channel
adjust frequency (set where the level of
"Signal Quality" becomes the maximum)
search
●
All services found will be added to the Digital TV Channel List.
Analogue TV Manual Tuning
Select a channel
Update Channel List
The new service is added with the current settings saved as they are.
Digital TV Signal Condition
A good Signal Strength is not an indication of suitable signal for Digital TV
reception. Please use the Signal Quality indicator as follows:
Signal Quality:
●
Green bar Good
●
Yellow bar Poor
●
Red bar Bad (Check the aerial)
Search and store
search
store