Maintenance - Power first 18V Impact Driver User Manual

8384455
SELECTING THE CORRECT SOCKET
Always use the correct size socket for bolts and nuts. An incorrect size socket will result in inaccurate and
inconsistent fastening torque and/or damage to the bolt or nut.
INSTALLING OR REMOVING SOCKET
Socket
Anvil
1. Align the hole in the side of the socket with the detent pin on the anvil and push it onto the anvil of the tool
until it locks into place. Tap it lightly if required.
2. To remove the socket, simply pull it off.

MAINTENANCE

WARNING! Replace or repair damaged parts. Use genuine parts only. Non-authorized parts may be dangerous
• Wipe the impact wrench down with a lint free cloth after each use.
• Make sure the anvil is clear of dirt or debris. If possible, spray it with compressed air before and
after each use.
• Tool service must be performed only by a qualified repair service centre. Service or maintenance performed
by unqualified personnel may result in a risk of injury.
• When servicing a tool, use only identical replacement parts. Use of unauthorized parts may create a risk of
shock or injury.
For technical questions call: 1-800-665-8685
18V Impact Driver V 2.0
9